IOFTech Maintenance Release8G Newsletters Doc FAQ Contact Home |
Release 7H Cumulative Fixes Last updated: Wednesday, 21-Jul-2010 13:50:32 EDT IOF 7H fixes can be downloaded as a composite cumulative fix file in terse format. All IOF/TSO and IOF/CICS fixes are packaged together in a single file. The IOF maintenance dialog will "receive" and "apply" fixes from the cumulative fix file.
|
|
7H Cumulative Fix File Contents |
|||
|---|---|---|---|
| Product | FixNum
Date |
Problem Description | Fixed in SpinLevel on Date |
| IOF/TSO IOF/CICS |
U7H2152 4Mar2005 |
The QT command suggests using the "RC" command to retrieve the highest return code for all jobs on the Job List Menu. The Status field now contains this information for non-zero return codes. Update QT to reflect this change | These fixes are not applied to any 7H spin level. |
| IOF/TSO IOF/CICS |
U7H2151 4Mar2005 |
The spool percent display on the MAS panel is too high for very small SPOOL systems because the BLOB tracks are shown as allocated tracks. Note that this fix requires z/OS 1.4 or later to be effective. There are no changes for earlier systems. | |
| IOF/TSO IOF/CICS |
U7H2150 4Mar2005 |
Incorrect data on SS line command screen on second or subsequent usage for same dataset without exiting from JOB Summary screen. | |
| IOF/TSO IOF/CICS |
U7H2148 4Mar2005 |
The ISFAUTH.DEST.** violation message are not suppressed when theuser is a Destination Operator or has READ access to the profile ISFOPER.DEST.jesx. | |
| IOF/TSO IOF/CICS |
U7H2147 4Mar2005 |
Modify the JOB CONTROL attribute to set a job type of
CONVERT when a job is being converted. This allows a LIMIT macro on the
CONTROL attribute to distinguish jobs being converted. The LIMIT macro below in
B23ALLOW will prevent any user from canceling a job while it is in conversion.
LIMCNVT LIMIT 1,0,JOBS,CONTROL,'*.*.*.CONVERT.CANCEL',ID=* |
|
| IOF/TSO IOF/CICS |
U7H2146 4Mar2005 |
HELP on the Job Summary Panel shows incorrect syntax for snapping part of a sysout data set. | |
| IOF/TSO
IOF/CICS |
U7H2144 11Jan2005 |
Authorization message for RACROUTE call to ISFOPER.DEST.JES2 and ISFOPER.ANYDEST.JES2 is not suppressed. This fix superceeds fix U7H2101, and can be applied whether or not U7H2101 was previously applied. |
These fixes are not applied to any 7H spin level |
| IOF/TSO | T7H2142 10Jan2005 |
Add the DUMPCB line command to the Output Group Display | |
| IOF/TSO
IOF/CICS |
U7H2141 6Jan2004 |
After application of PTF UA15627 (APAR UA15627), the JESCTL step of the M13GEN job gets error ASMA068S length error for symbol S35DL. | |
| IOF/TSO
IOF/CICS |
U7H2133 25Oct2004 |
Sporadic S0C9 abends in IOF Monitor due to erratic SIO counts after application of fix U7H2081. | |
| IOF/TSO IOF/CICS |
U7H2131 25Oct2004 |
Message "ASMA044E Undefined symbol - JQXTGWRP", in JESCTL assembly of M13GEN job after applying fix U7H2124 and generating on an OS/390 V2.4 to z/OS V1.1 JES2 system. | |
| IOF/TSO
|
T7H2115
29Sep2004 |
The "<" command to enter a MVS command and scan for the response in SYSLOG does not work for JES2 commands when the JES2 command character is period after application of T7H2054. | |
| IOF/TSO
IOF/CICS |
U7H2121
29Sep2004 |
After applying fix U7H2067, SNAP to a CC=M dataset can result in a garbage record being written. Fix U7H2067 is in error. | |
| IOF/TSO
IOF/CICS |
U7H2124
29Sep2004 |
The ALLOC field displays the number of track groups allocated to a job modulo 32767. | |
| IOF/TSO
IOF/CICS |
U7H2125
29Sep2004 |
Abend S0C4 can occur during SNAPCLOS after snapping entire job to a RECFM=xxM disk dataset from "IOF Job List Menu". | |
| IOF/TSO
IOF/CICS |
U7H2110
26Jul2004 |
When a job is on both jobname hold and duplicate hold, "DUP" is displayed in the Job List Status field instead of "JOB". This fix swaps the order of the check so that "JOB" is highest priority status to be displayed. | |
| IOF/TSO | T7H2109
26Jul2004 |
Remove caching the AT LOGON password when firing up a server session for an alternate userid. | |
| IOF/TSO
IOF/CICS |
U7H2108
26Jul2004 |
PAGEDEF/FORMDEF display NONE when attempting to erase these from the output group, when the original dataset did not have a PAGEDEF/FORMDEF value. | |
| IOF/TSO
IOF/CICS |
U7H2106
24Jun2004 |
The CUT, PASTE and ARRANGE commands do not work on the Output Group Display after fix U7H2100 is applied. | |
| IOF/TSO
IOF/CICS |
U7H2104
24Jun2004 |
SPUN Null DDs that have been removed from spool still appear on the "JOB Summary" for various jobs including SYSLOG. Record count and Dest fields are also null. | |
| IOF/TSO
IOF/CICS |
U7H2092
30Apr2004 |
The SIZE select clause does not work properly in z2 mode. | |
| IOF/TSO
IOF/CICS |
U7H2102
30Apr2004 |
A LIMIT 0,0 macro in B23ALLOW has no effect on "IOF Device List Display". | |
| IOF/TSO
IOF/CICS |
U7H2101
30Apr2004 |
This fix has been superseded by fix U7H2144 and has been converted to a null fix. | |
| IOF/TSO
IOF/CICS |
U7H2100
30Apr2004 |
This fix prevents a possible problem in the future if IOF 7J is run, and then the site reverts to run IOF 7H. IOF 7J adds new fields to several panels. If an ARRANGE command is issued for one of the new fields when running under 7J, prior releases of IOF may subsequently abend 0C6 or 0C1 attempting to arrange the non-existent fields. | |
| IOF/TSO
IOF/CICS |
U7H2065
30Apr2004 |
A line command directed to a job that has already been purged and receives a "job is gone" error message may be redirected to a different job. | |
| IOF/TSO
IOF/CICS |
U7H2096
18Feb2004 |
*** NOTE: Fix 2083 is in error. This fix supercedes fix 2083.
Dynamically allocated sysout datasets in SMPE jobs appear
duplicated on the IOF Job Summary after applying U7H2083.
Note that applying this fix reverses fix U7H2083. |
|
| IOF/TSO
IOF/CICS |
U7H2095
13Jan2004 |
The issuer of a IOF cancel function is difficult to determine
from TSO and impossible from CICS because the VIOFxxx message
does not contain the userid of the issuer of the function.
Add the userid of the TSO or CICS user to VIOFxxx messages.
Note that applying this fix changes the format of VIOFxxx messages in SYSLOG. |
|
| IOF/TSO | T7H2094
13Jan2004 |
VIOF423A message not found in 'ISPMLIB' library. When log type is set to OPERLOG, and old OPERLOG data has been deleted, error 14231 is generated. There is no error message in ISPMLIB for this error. | |
| IOF/TSO
IOF/CICS |
U7H2093
13Jan2004 |
The ALLOC field is cleared to blank for all running jobs that are executing on a system that other than the system on which the TSO user is executing. | |
| IOF/TSO | T7H2088
24Nov2003 |
Add the EDIT JOB function to the Output Group Display. | |
| IOF/TSO
IOF/CICS |
U7H2089
24Nov2003 |
Enclave CPU time is added to the CPU field beginning in release 7H. This value is not reset between jobs, so that the enclave CPU time for a job is shown for succeeding jobs that run in the same address space. Remove enclave CPU time from the CPU field in the Job List Menu. | |
| IOF/TSO
IOF/CICS |
U7H2090
24Nov2003 |
Disable the JES2 level/service level mismatch panel. | |
| IOF/TSO | T7H2091
24Nov2003 |
Message VIOF321@ is not found in ISPMLIB. This message says that the index data set found is for the wrong job. | |
| IOF/TSO | U7H2081
9Oct2003 |
"******" appears in System SIO field on "IOF Monitor Screen" when running on hardware supporting up to 32 processors and 30 Lpars. |
2003 282 9Oct2003 |
| IOF/TSO IOF/CICS | U7H2083
9Oct2003 |
This fix is in error. It was modified on 18Feb2004 to
make no changes if applied. Do not apply. If previously applied,
then fix U7H2096 should be applied to reverse U7H2083 Null spun sysouts are not properly displayed on Job Summary after SHOWNULL command is issued. |
|
| IOF/TSO IOF/CICS | U7H2084
9Oct2003 |
Abend S0C4 when trying to "P" or "N" from IOF Job Summary when destination is a CA-Spool dataset on a z/OS V1.4 or higher JES2. | |
| IOF/TSO | T7H2087
9Oct2003 |
The menu of old syslog output produced by the "L OLD" command is missing the colon from the time fields. | |
| IOF/TSO | T7H2086
9Oct2003 |
The "L O" command with a negative number argument to scan old operlogs may get a "keyword" error. | |
| IOF/TSO | T7H2085
9Oct2003 |
Incorrect scroll to the right for OLD Syslogs that have been reindexed by SLAMMEMR when HCFORMAT is set to CENTURY. | |
| IOF/TSO | T7H2082
9Oct2003 |
The EDIT JOB function may cause abend 013-0C when the JESSPOOL SAF class is enabled. LIMIT macros for sysin data sets may not be honored by the EDIT JOB function. | |
| IOF/TSO | T7H2079
9Sept2003 |
Multiple ED line commands on the Job List Menu may only edit the first job. | |
| IOF/TSO
IOF/CICS |
U7H2078 9Sept2003 |
Already printed or cancelled null SPUN sysout datasets are not always suppressed from the "IOF Job Summary". | |
| IOF/TSO | T7H2077
9Sept2003 |
When a trailing wildcard is specified on the PREFIX command, then zero characters are not considered to be a match. | |
| IOF/TSO | T7H2076
9Sept2003 |
Modify the SLAMARCH clist to validate the second level of the archive data set name when deleting old archived logs. | |
| IOF/TSO
IOF/CICS |
U7H2074 9Sept2003 |
A RC=2575 is given when a TSICOPY statement is used to retrieve the MENU field for a job in the "Running Jobs" section of the "IOF Job List Menu". | |
| IOF/TSO
IOF/CICS |
U7H2073 9Sept2003 |
Bad data in INPUT Class field while job is reading into system. | |
| IOF/TSO
IOF/CICS |
U7H2072 9Sept2003 |
Bad data in INPUT Class field while job is reading into system. | |
| IOF/TSO | T7H2071 9Sept2003 |
The DQR command will jump the the IOF Option Menu when a printer has a LIMIT parm set. DQR will not function properly when multiple PRMODE values are defined for a printer. | |
| IOF/TSO | T7H2048 9Sept2003 |
The Job Summary EDIT primary command leaves input data sets displayed after the edit session completes. | |
| IOF/TSO
IOF/CICS |
U7H2064 9Sept2003 |
Abend S0C1 occurs for most HELD Dataset functions on certain machine types that do not support the CHECKSUM instruction. | |
| IOF/TSO
IOF/CICS |
U7H2067
3July2003 |
This fix is no longer needed and has been replaced by U7H2125 | |
| IOF/TSO
IOF/CICS |
U7H2068
3July2003 |
The GRPDRCMD variable in DVAR panel displays the wrong setting when the DRCMD operand of the GROUP macro is not present. | |
| IOF/TSO
IOF/CICS |
U7H2069
3July2003 |
HELP for the monitor panel has several minor errors in the panel format section. | |
| IOF/TSO
IOF/CICS |
U7H2070
3July2003 |
Incorrect date in "RAN/RECEIVED", "YEAR/DATE/TIME JULIAN", on the "IOF Job List Menu" and "RAN/RECEIVED" on the "IOF Job Summary" when the output is transmitted through a JES2 Offload device or a JES2 NJE connection. | |
| IOF/TSO | T7H2062 10Apr2003 |
Excessive CPU time is used by IOF when a job with a very large number of datasets is selected. |
2003 100 10Apr2003 |
| IOF/TSO | T7H2056 1Apr2003 |
The SLAMMEMO and SLAMMEMR clists do not pass the &INIT parm when invoking the SLAMPROC clist. | |
| IOF/TSO IOF/CICS | U7H2059 1Apr2003 |
Abend S0C1 can occur when selecting a job if the job's MESSAGES dataset is missing the IEF374I message. | |
| IOF/TSO IOF/CICS | U7H2053 1Apr2003 |
This fix has been withdrawn and should not be applied. It has been replaced with a null fix that has no effect. | |
| IOF/TSO | T7H2054 1Apr2003 |
The specified MVS command may not be issued on some systems when the "<" IOF subcommand is entered. | |
| IOF/TSO | T7H2058 1Apr2003 |
The list of old OPERLOG logs produced by the "L OLD" command with LOGTYPE set to OPERLOG or OPERACT displays the year 2000 years too high. | |
| IOF/TSO | T7H2061 1Apr2003 |
The SLAMRUN CLIST specifies the UNIT parm on the SAVEINDX instruction even when the index data set already exists. This can cause errors when the index data set has been moved to a different volume serial. | |
| IOF/TSO | T7H2057 1Apr2003 |
When the LOGTYPE is set to OPERACT, the first "L" command in each IOF session does not detect that OPERLOG is active, so displays SYSLOG instead. | |
| IOF/TSO | T7H2055 1Apr2003 |
SLAMARCH gets "ERROR 978 Too many items selected - use ENABLE cmd to request more" when more than 99 spun SYSLOG groups are processed. | |
| IOF/TSO | T7H2046 10Dec2002 |
Add the "ARM" description to the STATUS field on the IOF Job List Menu to indicate that the job is registered with the Automatic Restart Manager (ARM). | |
| IOF/TSO | T7H2052 19Nov2002 |
The "L" command gets "keyword" error when the log type is OPERLOG. | |
| IOF/TSO | T7H2049 8Nov2002 |
Modify the IOF7H exec so that it will pass IOF parms properly when invoked from an ISPF Option Panel. |
2002 315 11Nov2002 |
| IOF/TSO IOF/CICS | U7H2050 8Nov2002 |
Selecting jobs that were running when the system crashed or selecting certain started tasks with nested cataloged procedures can cause system abend 0C1 in the STEPSCAN module (042D). | |
| IOF/TSO IOF/CICS | U7H2051 8Nov2002 |
Entering the SYSID command with no operands when inside SYSLOG gives error message "There are no active SYSLOG data sets for sysid $NONE$". | |
|
Optional Fixes
Click here for information of how to apply optional fixes |
|||
| Product | FixNum
Date |
Option Description | Not applied to spin. |
| IOF/TSO
IOF/CICS |
U7H9001
1Oct2002 |
The Kanji and Yiddish character sets define lower case characters to be unique characters. This fix modifies IOF to display all panel headers and HELP in upper case only. Browse data is not translated. | Optional |
| IOF/TSO
IOF/CICS |
U7H9003
1Oct2002 |
The default screen size for IOF in TSO Batch is 60 lines. This optional patch changes the screen size to 255. | Optional |
| IOF/TSO
IOF/CICS |
U7H9004
1Oct2002 |
AUTOCON setting is ON by default. This fix will set the default value to OFF so that users will not have to issue AUTOCON OFF. AUTOCON can be enabled by entering "AUTOCON ON". | Optional |
| IOF/TSO
IOF/CICS |
U7H9005
1Oct2002 |
Disable automatic swapin of a running task when an open dataset is selected for browse. When this fix is applied, it is not possible to browse data in buffers of swapped out running jobs. | Optional |
| IOF/TSO
IOF/CICS |
U7H9006
1Oct2002 |
Force the IOF extended console name to equal the requestor's userid and default the console authority to INFO (unless overridden by security systems rules). | Optional |
| IOF/TSO
IOF/CICS |
T7H9007 C7H9007 1Oct2002 |
A "Partial" error can occur because the number of items requested is too large to fit into the ECSA memory. This fix can be used to raise this maximum to whatever is deemed acceptable. | Optional |
| IOF/TSO
IOF/CICS |
U7H9008
1Oct2002 |
The ACTION messages appearing at the bottom of the SYSLOG screen can contain messages from all systems of a SYSPLEX. This optional fix will filter messages such that only the messages originating from the current system will be displayed. | Optional |
| IOF/TSO | T7H9009
1Oct2002 |
When the ISPF RETURN command is issued from an application that was initiated via an IOF command that specified NEWAPPL, control returns to the ISPF option menu, bypassing IOF. This optional fix causes control to return to IOF; but disables the ISPF JUMP (=) feature. The IOF EDIT command, and the TEXTREF command interfacing to QUICKREF are two examples of linking to a NEWAPPL. | Optional |
| IOF/TSO
IOF/CICS |
U7H9015
1Oct2002 |
This optional fix changes the order of IBM defined SAF calls to check ALLOW and LIMIT macros before checking IBM defined classes. | Optional |
| IOF/TSO IOF/CICS |
U7H9018
1Oct2002 |
Force LOG=NONE on SAF calls performed for ALLOW macros with the ACF parmeter, when the A60ACF option members specifies RACF as the security system. | Optional |
| IOF/TSO IOF/CICS |
U7H9019
1Oct2002 |
Change IOF to force LOGGING for TSS SAF calls. | Optional |
| IOF/TSO IOF/CICS |
U7H9021
10Dec2002 |
An optional fix to prevent DEVID conversion when the active device is a PSEUDO device. | Optional |
| IOF/TSO | T7H9022
10Dec2002 |
This is an OPTIONAL fix. Add an INITCMD field to the OPTUS3 option panel. The INITCMD is the name of a clist or Rexx exec to be executed on entry to the Job List Menu or Output Group Display. Also add a sample INITCMD in the form of the IOFSORTX clist. | Optional |
| IOF/TSO
IOF/CICS |
U7H9025
10Apr2003 |
This is an OPTIONAL fix. Change the way IOF highligts a JOB on the Output Queue from having the today's day portion of the Julian date to having a JOE create time within the last 24 hours. | Optional |
| IOF/TSO
IOF/CICS |
U7H9032
9Sept2003 |
This is an OPTIONAL fix. This optional fix increases the number of JOBNAME masks that can be specified in the USSCOPE/USSCLST parm from 32 to 96. | Optional |
| IOF/TSO
IOF/CICS |
U7H9033
9Sept2003 |
This is an OPTIONAL fix. IOF will not display a spun dataset on "IOF Job Summary" if it has already printed or has been purged. This optional fix provides a default value that will allow all datasets to always be displayed. Additionally, IOF does not query status of the NULLSYSO variable if defined as an option variable, only as a profile or session. | Optional |
| IOF/TSO
IOF/CICS |
U7H9035
9Sept2003 |
This is an OPTIONAL fix. Optional fix to always raise "Data Set Empty" message for Select, Print, Snap, or Alloc, when the dataset is a null SPUN sysout | Optional |
| IOF/TSO
IOF/CICS |
U7H9036
9Sept2003 |
This is an OPTIONAL fix. Change the AGE field on the Job List Menu, and the DAYSOLDJ field on the Output Group Display to display Georgian time format yy/mm/dd instead of Julian format yyyy/ddd. | Optional |
| IOF/TSO
IOF/CICS |
U7H9037
18Feb2004 |
This is an OPTIONAL fix. This is a required fix for Optional fix U7H9035. After application of optional fix U7H9035, you will receive "Index Error" or "Data Set Empty" error messages when attempting to browse SYSLOG with the "L" function or to select the current open sysout dataset from the Job Summary for SYSLOG. | Optional |
| IOF/TSO | T7H9039
18Feb2004 |
This is an OPTIONAL fix. This fix replaces T7H2075 Add SYSID and DATE filters to the "L ARCH" selection menu. Change the date format from MM/DD/YYYY to YYYY/MM/DD. | Optional |
| IOF/TSO
IOF/CICS |
U7H9040
18Feb2004 |
This is an OPTIONAL fix. Add a new MSURROGT JOB attribute. Set the value to YES if the current user is a surrogate user for the output owner. | Optional |
| IOF/TSO
IOF/CICS |
U7H9041
18Feb2004 |
This is an OPTIONAL fix. Change IOF to allow SMF logging, ACF2 messages, and the violation count to be honored. | Optional |
| IOF/TSO
IOF/CICS |
U7H9042
24Jun2004 |
This is an OPTIONAL fix. Change the default allowable commands to be executed from 100 to 1024. | Optional |
| IOF/TSO
|
T7H9045
24Jun2004 |
This is an OPTIONAL fix for release 7J compatibility.
Add the SYSPLEX name to the OPERLOG index data set name, including
the old index data set names. Note that applying this fix
modifies the operlog index data set name to make it incompatible
with previous indices.
This fix replaces T7H9044 and should be applied whether or not T7H9044 has been applied. |
Optional |
|
IOF Spin LevelsThe IOF distribution MPI file is periodically refreshed to a new spin level. A spin level consists of the previous level with additional maintenance applied. A spin level is identified by the julian date on which it was built, so the higher the number the more maintenance that has been applied. IOF fixes that are applied to a spin level are included in the IOF UPDATES data set. They are marked as "applied" by user "IOFSPIN". This allows the IOF maintenance dialog to accurately display the status of all applied maintenance. Use the IOF Maintenance Dialog to display the fix status or your system. To determine your IOF spin level:
|
|||
Triangle Systems, Inc. PO Box 12752, Research Triangle
Park, NC 27709
IOFTech Maintenance Release8G Newsletters Doc FAQ Contact Home
[an error occurred while processing this directive]
