IOF Q&A Message Board

Dumping all the running IOF jobs to a file with all the parameters - Nandakumar Balachandran 07:32:37 02/22/10 (1)
- Re: Dumping all the running IOF jobs to a file with all the parameters - Jim Walker 12:49:36 02/22/10 (0)
IOF sendmail command - Brian Stahl 12:25:21 01/28/10 (2)
- Re: IOF sendmail command - Jim Walker 12:36:29 01/29/10 (1)
  - Re: IOF sendmail command - Jim Walker 09:01:09 02/01/10 (0)
Snap jobname & jobid - Ralf 09:40:38 01/25/10 (1)
- Re: Snap jobname & jobid - Jim Walker 10:23:48 01/25/10 (0)
Final Spool Offload at DR - Lee Barnes 10:50:42 01/06/10 (1)
- Re: Final Spool Offload at DR - Jim Walker 13:24:04 01/06/10 (0)
year 2010 - Kent 13:59:11 12/29/09 (1)
- Re: year 2010 - Jim Walker 20:14:36 12/29/09 (0)
B23ALLOW and MNOTE - Todd Smith 08:10:12 12/18/09 (2)
- Re: B23ALLOW and MNOTE - Jim Walker 09:39:00 12/18/09 (1)
  - Re: B23ALLOW and MNOTE - Todd Smith 10:22:25 12/18/09 (0)
Command/TSICOPY Nesting in REXX - Robbie Gregory 08:25:57 12/08/09 (1)
- Re: Command/TSICOPY Nesting in REXX - Jim Walker 10:40:07 12/09/09 (0)
Trapping MVS/JES2 cmd output within IOF REXX - Robbie Gregory 14:16:26 12/02/09 (1)
- Re: Trapping MVS/JES2 cmd output within IOF REXX - Jim Walker 13:00:51 12/03/09 (0)
How to fetch the return code from IOF environment - Vikram 02:18:50 11/30/09 (1)
- Re: How to fetch the return code from IOF environment - Jim Walker 16:36:46 11/30/09 (0)
JOBUPLOD - Keith Reynolds 16:26:35 11/24/09 (2)
- Re: JOBUPLOD - Jim Walker 09:13:07 11/25/09 (1)
  - Re: JOBUPLOD - Keith Reynolds 16:43:42 11/25/09 (0)
B99MISC - Kent 16:27:17 11/19/09 (1)
- Re: B99MISC - Frank Schubert 10:46:00 11/20/09 (0)
Not allowing users tio edit output. - Doug Oliverio 12:28:45 11/16/09 (1)
- Re: Not allowing users tio edit output. - Jim Walker 08:57:18 11/17/09 (0)
enclaves - Doug Oliverio 14:05:05 11/06/09 (1)
- Re: enclaves - Frank Schubert 15:35:32 11/09/09 (0)
IOF Job Archival setup - Lou D'Agnolo 11:24:44 10/23/09 (2)
- Re: IOF Job Archival setup - Frank Schubert 13:49:26 10/23/09 (1)
  - Re: IOF Job Archival setup - jim.walker 10:44:14 10/27/09 (0)
Can clist IOFWTR process output datasets marked as "DONE" - Richard Bernstein 10:58:42 09/22/09 (1)
- Re: Can clist IOFWTR process output datasets marked as "DONE" - Jim Walker 13:29:02 09/22/09 (0)
YSTEM COMPLETION CODE=0E0 REASON CODE=00000028 - Doug Oliverio 10:52:04 09/17/09 (1)
- Re: YSTEM COMPLETION CODE=0E0 REASON CODE=00000028 - Jim Walker 10:35:21 09/18/09 (0)
MVS command in batch - bobby bauer 15:19:11 08/18/09 (3)
- Re: MVS command in batch - bobby bauer 16:07:10 08/18/09 (2)
  - Re: MVS command in batch - Jim walker 08:51:20 08/19/09 (1)
    - Re: MVS command in batch - Jim Walker 10:53:30 08/20/09 (0)
Snapping Job Log of a Started Task - Bob Chapman 14:26:08 08/12/09 (1)
- Re: Snapping Job Log of a Started Task - Jim Walker 14:23:08 08/14/09 (0)
Requirement for IOF SVC - Robbie Gregory 07:34:12 08/06/09 (1)
- Re: Requirement for IOF SVC - Jim Walker 14:26:49 08/06/09 (0)
IOF ACF2 Rules - Pearlson Christopher 23:12:38 07/23/09 (1)
- Re: IOF ACF2 Rules - Frank Schubert 11:26:04 07/24/09 (0)
slamoper - Van Tong 14:28:34 07/02/09 (1)
- Re: slamoper - Jim Walker 15:00:15 07/02/09 (0)
MCS Extended Console Access - Julie Jones 15:49:09 06/29/09 (2)
- Re: MCS Extended Console Access - Jim Walke 09:50:11 06/30/09 (1)
  - Re: MCS Extended Console Access - Jim Walker 15:02:41 07/02/09 (0)
OUTQUE Selection Criteria - Steve Conway 15:02:20 06/26/09 (2)
- Re: OUTQUE Selection Criteria - Jim Walker 09:25:05 06/29/09 (1)
  - Re: OUTQUE Selection Criteria - Steve Conway 10:06:41 06/29/09 (0)
SLAMOPER Insufficient memory to perform requested function - Mike Balsom 10:25:06 06/26/09 (1)
- Re: SLAMOPER Insufficient memory to perform requested function - Jim Walker 12:33:09 06/26/09 (0)
Wrong CPU time when using zIIP engines - Mike Perry 12:24:00 06/25/09 (1)
- Re: Wrong CPU time when using zIIP engines - Frank Schubert 10:47:32 06/28/09 (0)
Spin Level Expectations - Steve Conway 10:05:31 06/19/09 (2)
- Re: Spin Level Expectations - Frank V. Schubert 11:35:08 06/19/09 (1)
  - Re: Spin Level Expectations - Steve Conway 12:28:47 06/19/09 (0)
Very long response time - Ralf 05:05:36 06/09/09 (2)
- Re: Very long response time - Jim Walker 09:46:58 06/10/09 (1)
  - Re: Very long response time - Jim Walker 11:09:24 06/10/09 (0)
Panel 'VIOFSC7C' error Panel not found - Alton Mines 13:33:14 06/03/09 (1)
- Re: Panel 'VIOFSC7C' error Panel not found - Jim Walker 09:50:37 06/10/09 (0)
S0C4 with SDSF in split screen - Dave Trigger 08:33:25 05/05/09 (1)
- Re: S0C4 with SDSF in split screen - Jim Walker 09:57:57 05/27/09 (0)
Limits on IOF Displays running in Batch TSO - Bob Chapman 10:13:30 04/30/09 (2)
- Re: Limits on IOF Displays running in Batch TSO - Jim Walker 13:29:23 04/30/09 (0)
Upload - Keith Reynolds 15:00:42 04/15/09 (2)
- Re: Upload - Keith Reynolds 15:56:23 04/15/09 (0)
- Re: Upload - Jim Walker 15:55:28 04/15/09 (0)
repeat find in IOF/TSO 8C - Robbie Gregory 15:07:45 04/02/09 (2)
- Re: repeat find in IOF/TSO 8C - Jim Walker 11:34:08 04/08/09 (0)
- Re: repeat find in IOF/TSO 8C - Robbie Gregory 15:11:36 04/02/09 (0)
DEST/DEVICE in z/OS 1.10 - Doug Oliverio 08:33:42 04/01/09 (1)
- Re: DEST/DEVICE in z/OS 1.10 - Frank Schubert 11:26:21 04/08/09 (0)
SD $DDNAME$(OUTPUT)... - Robbie Gregory 08:33:15 03/17/09 (2)
- Re: SD $DDNAME$(OUTPUT)... - Jim Walker 10:40:54 03/25/09 (0)
- Re: SD $DDNAME$(OUTPUT)... - Robbie Gregory 09:39:02 03/17/09 (0)
Command "DA" into a Dataset - Ralf 05:35:49 02/18/09 (1)
- Re: Command "DA" into a Dataset - Jim Walker 10:13:34 02/18/09 (0)
Output Groups for Another Node on one screen - Robbie Gregory 11:28:44 02/17/09 (1)
- Re: Output Groups for Another Node on one screen - Jim Walker 11:28:30 03/01/09 (0)
Proactive Software Alerts - Joe Duncan 15:03:57 02/11/09 (1)
- Re: Proactive Software Alerts - Frank Schubert 10:43:03 02/16/09 (0)
REXX and '/L' - Jim Riffe 12:23:33 01/28/09 (2)
- Re: REXX and '/L' - Frank Schubert 16:02:07 01/30/09 (0)
Limit "to" destination - Robbie Gregory 11:34:28 01/15/09 (0)
IOF and ISPF shared profile - Stan Saeger 11:22:56 01/15/09 (1)
- Re: IOF and ISPF shared profile - Frank Schubert 12:31:43 01/16/09 (0)
Issuing commands with AUTOCON OFF - Robbie Gregory 11:33:54 12/19/08 (1)
- Re: Issuing commands with AUTOCON OFF - Robbie Gregory 13:36:44 12/19/08 (0)
MSGLEVEL (1,0) gets steps wrong - Doug Oliverio 13:48:50 12/18/08 (1)
- Re: MSGLEVEL (1,0) gets steps wrong - Jim Walker 09:22:57 12/23/08 (0)
SDSF Batch vs IOF Batch - James Caringal 15:35:03 12/02/08 (3)
- Re: SDSF Batch vs IOF Batch - Jim Walker 16:28:16 12/02/08 (2)
  - Re: SDSF Batch vs IOF Batch - James Caringal 17:26:36 12/02/08 (1)
    - Re: SDSF Batch vs IOF Batch - Jim Walker 10:55:38 12/04/08 (0)
Log not displaying complete syslog - Frank Chu 12:13:20 12/02/08 (3)
- Re: Log not displaying complete syslog - Jim Walker 16:17:21 12/02/08 (2)
  - Re: Log not displaying complete syslog - Frank Chu 11:02:57 12/03/08 (1)
    - Re: Log not displaying complete syslog - Jim Walker 13:55:41 12/11/08 (0)
Capture FIND ALL result - dbals 17:48:59 11/26/08 (1)
- Re: Capture FIND ALL result - Jim Walker 10:31:03 12/01/08 (0)
Calling IOF from USS - Harald Goldbeck 10:07:12 11/24/08 (1)
- Re: Calling IOF from USS - Jim Walker 14:38:36 12/03/08 (0)
Command seperation - Lou DAgnolo 22:31:42 11/18/08 (1)
- Re: Command seperation - Jim Walker 13:42:09 11/19/08 (0)
IOF Expriation Date and Grace Period - Todd Smith 14:22:45 11/07/08 (1)
- Re: IOF Expriation Date and Grace Period - Jim Walker 10:18:00 11/10/08 (0)
Calling IOF on another LPAR in Rexx - Rob 08:27:35 11/06/08 (2)
- Re: Calling IOF on another LPAR in Rexx - Jim Walker 10:31:33 11/10/08 (1)
  - Re: Calling IOF on another LPAR in Rexx - Rob 08:44:49 11/13/08 (0)
Equivalent to SDSF XSC and XDC - Robbie Gregory 12:10:20 10/30/08 (1)
- Re: Equivalent to SDSF XSC and XDC - Jim Walker 09:50:00 10/31/08 (0)
Capturing NAME TITLE BUILDING values - Robbie Gregory 08:47:17 10/23/08 (2)
- Re: Capturing NAME TITLE BUILDING values - Jim Walker 11:13:13 10/23/08 (0)
Use of $DDNAME$ parameter on SD subcommand - Robbie Gregory 10:57:13 10/14/08 (3)
- Re: Use of $DDNAME$ parameter on SD subcommand - Jim Walker 11:30:30 10/16/08 (1)
  - Re: Use of $DDNAME$ parameter on SD subcommand - Robbie Gregory 07:55:15 10/17/08 (0)
- Re: Use of $DDNAME$ parameter on SD subcommand - Frank Schubert 15:16:09 10/14/08 (0)
STEP and PRSTEP on IOF Job Summary - Robbie Gregory 11:25:12 10/09/08 (2)
- Re: STEP and PRSTEP on IOF Job Summary - Frank Schubert 11:40:28 10/12/08 (1)
  - Re: STEP and PRSTEP on IOF Job Summary - Robbie Gregory 08:53:07 10/13/08 (0)
SDSF SET DISPLAY ON - Robbie Gregory 20:34:21 10/04/08 (1)
- Re: SDSF SET DISPLAY ON - Jim Walker 10:53:16 10/06/08 (0)
Error 10304 I/O error occurred trying to position in data set - Doug Oliverio 07:34:13 10/02/08 (1)
- Re: Error 10304 I/O error occurred trying to position in data set - Jim Walker 12:55:10 10/02/08 (0)
DEST LOCAL - Robbie Gregory 14:57:20 10/01/08 (1)
- Re: DEST LOCAL - Jim Walker 12:16:48 10/02/08 (0)
PLIST command - Robbie Gregory 09:59:32 10/01/08 (1)
- Re: PLIST command - Jim Walker 11:10:01 10/01/08 (0)
operlog - Doug Oliverio 08:33:52 10/01/08 (0)
do i need a slamoper task along with slamrun? - Doug Oliverio 11:17:47 09/30/08 (1)
- Re: do i need a slamoper task along with slamrun? - Jim Walker 12:34:14 09/30/08 (0)
CHK getting refused message - Todd Smith 12:45:08 09/26/08 (2)
- Re: CHK getting refused message - Ralf 05:05:01 09/30/08 (0)
- Re: CHK getting refused message - Ralf 05:04:42 09/30/08 (0)
Capturing SYSLOG at DR - Lee Barnes 15:13:09 09/23/08 (1)
- Re: Capturing SYSLOG at DR - Jim Walker 11:47:41 09/29/08 (0)
IOF Output Group Display - Bill Hirsch 11:50:36 08/26/08 (1)
- Re: IOF Output Group Display - Jim Walker 10:59:37 08/27/08 (0)
ALLOW macro DEVNAME - Robbie Gregory 11:14:58 08/11/08 (2)
- Re: ALLOW macro DEVNAME - Robbie Gregory 10:41:46 08/12/08 (1)
  - Re: ALLOW macro DEVNAME - Frank Schubert 16:51:17 08/12/08 (0)
SORT field on the IOF Option Menu - Don Douglas 10:47:53 07/31/08 (1)
- Re: SORT field on the IOF Option Menu - Jim Walker 10:20:07 08/04/08 (0)
How is the CPU% calculated on the Monitor screen? - Bill Hirsch 18:13:03 07/22/08 (0)
Snap output of a running stc - Doug Oliverio 11:03:48 07/17/08 (2)
- Re: Snap output of a running stc - Doug Oliverio 08:53:06 07/21/08 (1)
  - Re: Snap output of a running stc - Jim Walker 11:47:09 07/22/08 (0)
ED gets error message ISREI001 - Mike Lattimer 11:35:10 07/16/08 (1)
- Re: ED gets error message ISREI001 - Jim Walker 14:05:41 07/17/08 (0)
JARUPLOD error 9919 Invalid value specified for "DSNAME" - Jasen Kloeppel 14:06:17 07/09/08 (1)
- Re: JARUPLOD error 9919 Invalid value specified for "DSNAME" - Jim Walker 14:11:46 08/20/08 (0)
Executing External Command from IOF ends IOF - Steve Conway 15:41:23 07/01/08 (1)
- Re: Executing External Command from IOF ends IOF - Jim Walker 10:01:18 07/03/08 (0)
run only N number of jobs at a time - chamy 09:42:48 07/01/08 (1)
- Re: run only N number of jobs at a time - Jim Walker 10:44:01 07/01/08 (0)
How to make INVNULL persistent - Robin Ryerse 09:24:12 06/11/08 (1)
- Re: How to make INVNULL persistent - Jim Walker 11:53:09 06/11/08 (0)
SYSLOG CAPTURE - Bob Chapman 14:52:38 06/03/08 (1)
- Re: SYSLOG CAPTURE - Frank Schubert 12:22:44 06/04/08 (0)
B49CMPAT MVSCHAR - Robbie Gregory 12:41:14 05/21/08 (1)
- Re: B49CMPAT MVSCHAR - Jim Walker 08:58:14 05/27/08 (0)
CMDCOMBO Coding - Robbie Gregory 14:51:47 05/14/08 (1)
- Re: CMDCOMBO Coding - Jim Walker 09:29:05 05/15/08 (0)
IOFWTR SNAP itself - Sam Knutson 12:03:44 05/08/08 (2)
- Re: IOFWTR SNAP itself - Jim Walker 09:11:01 05/13/08 (1)
  - Re: IOFWTR SNAP itself - Jim Walker 10:27:35 05/14/08 (0)
Can you submit a console command from a batch job? - Paul Lanoha 14:53:54 04/17/08 (1)
- Re: Can you submit a console command from a batch job? - Jim Walker 13:01:42 04/18/08 (0)
IOF Find all - Doug Oliverio 09:05:10 04/09/08 (3)
- Re: IOF Find all - Doug Oliverio 13:39:23 04/15/08 (0)
- Re: IOF Find all - Jim Walker 11:12:24 04/15/08 (1)
  - Re: IOF Find all - Jim Walker 13:24:50 04/15/08 (0)
no archived syslogs - Todd Smith 09:18:59 03/18/08 (1)
- Re: no archived syslogs - Jim Walker 13:50:04 03/27/08 (0)
Using IOF unconventionally or How to avoid learning JES2 programming - Mike 08:45:45 03/04/08 (2)
- Re: Using IOF unconventionally or How to avoid learning JES2 programming - Jim Walker 11:50:09 03/05/08 (0)
Restricting UPLOAD - Mike 17:15:07 03/03/08 (1)
- Re: Restricting UPLOAD - Jim Walker 11:45:46 03/05/08 (0)
Optional zap U8C9018 not carried into IOFT8C3U - Joe D'Alessandro 13:52:02 02/04/08 (0)
JAROFFLD - Keith Reynolds 12:53:14 01/09/08 (2)
- Re: JAROFFLD - Jim Walker 15:11:10 01/09/08 (1)
  - Re: JAROFFLD - Keith Reynolds 16:49:31 01/09/08 (0)
System Monitor - sort by dispatch priority - Jason Wallace 14:43:35 12/19/07 (2)
- Re: System Monitor - sort by dispatch priority - Jim Walker 15:52:32 12/19/07 (1)
  - Re: System Monitor - sort by dispatch priority - Jason Wallace 16:08:30 12/19/07 (0)
CPU Usage - John McBryde 05:45:07 12/06/07 (1)
- Re: CPU Usage - Frank Schubert 11:57:18 12/12/07 (0)
option fix T8A9059 - Brian Stahl 15:19:51 11/29/07 (2)
- Re: option fix T8A9059 - Jim Walker 11:24:58 12/04/07 (0)
confirm cancel request - Peter Schwab 08:23:48 11/20/07 (1)
- Re: confirm cancel request - Jim Walker 15:03:27 11/20/07 (0)
IOF 8C.0 - Phillip Propst 09:58:58 10/29/07 (1)
- Re: IOF 8C.0 - Jim Walker 12:52:49 10/29/07 (0)
Why these two allows....isn't one useless? - Derek Alston 20:14:15 10/26/07 (1)
- Re: Why these two allows....isn't one useless? - Jim Walker 12:47:23 10/29/07 (0)
Unix Process Kill command - Doug Oliverio 09:46:34 10/16/07 (2)
- Re: Unix Process Kill command - Jim Walker 11:37:25 10/18/07 (1)
  - Re: Unix Process Kill command - Jim Walker 11:53:13 10/22/07 (0)
Error in XMITIP - Ralf 06:33:02 09/20/07 (3)
- Re: Error in XMITIP - Jim Walker 09:43:51 09/20/07 (2)
  - Re: Error in XMITIP - Ralf 06:35:04 09/21/07 (0)
  - Re: Error in XMITIP - Jim Walker 11:56:32 09/20/07 (0)
SLAMRUN doesn't work after applying T8C2332 - Jason Wallace 17:05:38 09/11/07 (3)
- Re: SLAMRUN doesn't work after applying T8C2332 - Jim Walker 15:31:24 09/12/07 (1)
  - Re: SLAMRUN doesn't work after applying T8C2332 - Jim Walker 09:46:04 09/20/07 (0)
- I think I fixed it - Jason Wallace 17:28:01 09/11/07 (0)
Attention'ing Out of OPERLOG - Dennis Schaffer 19:25:06 08/28/07 (1)
- Re: Attention'ing Out of OPERLOG - Jim Walker 09:09:41 10/15/07 (0)
SDSF SJ command equivalent in IOF - Michael Walker 15:17:34 08/23/07 (1)
- Re: SDSF SJ command equivalent in IOF - Frank Schubert 14:31:50 08/24/07 (0)
snap using iof in batch - Doug Oliverio 07:43:26 08/07/07 (6)
- Re: snap using iof in batch - Jim Walker 14:02:35 08/08/07 (5)
  - Re: snap using iof in batch - Jim Walker 08:50:47 08/09/07 (0)
  - Re: snap using iof in batch - Doug Oliverio 14:27:06 08/08/07 (0)
Using IOFWTR - Anuj 15:58:54 08/03/07 (2)
- Re: Using IOFWTR - Jim Walker 10:01:31 08/06/07 (1)
  - Re: Using IOFWTR - Anuj 17:23:32 08/06/07 (0)
Unable to find indes data set - Todd Smith 11:51:15 07/30/07 (2)
- Re: Unable to find indes data set - Todd Smith 11:23:35 07/31/07 (1)
  - Re: Unable to find indes data set - Jim Walker 09:35:13 08/03/07 (0)
Not getting entire listing - Grant Griffith 08:24:55 07/29/07 (2)
- Re: Not getting entire listing - Jim Walker 09:41:00 08/03/07 (0)
- Re: Not getting entire listing - More Info - Grant Griffith 08:21:46 07/30/07 (0)
"Wrong" Member after appling IOF Fixes - Ralf 06:13:09 07/24/07 (2)
- Re: "Wrong" Member after appling IOF Fixes - Jim Walker 13:03:43 07/27/07 (0)
- Re: "Wrong" Member after appling IOF Fixes - Jim Walker 08:57:26 07/26/07 (0)
ABEND0C4 in MODULE IOFT8B0M - Ron Fritz 13:15:22 06/15/07 (2)
- Re: ABEND0C4 in MODULE IOFT8B0M - Jim Prestwood 16:38:51 06/15/07 (1)
  - Re: ABEND0C4 in MODULE IOFT8B0M - Ron Fritz 07:34:42 06/21/07 (0)
VIOF150C - Keith Reynolds 12:12:29 06/15/07 (2)
- Re: VIOF150C - Frank Schubert 11:36:37 07/02/07 (0)
The product is not licensed to execute at this site - Tom Klinge 09:20:23 06/13/07 (1)
- Re: The product is not licensed to execute at this site - Frank Schubert 11:09:56 06/18/07 (0)
ED on command line z/os v1.8 - Ron Fritz 10:14:11 06/07/07 (1)
- Re: ED on command line z/os v1.8 - Frank Schubert 14:55:31 06/12/07 (0)
ZIIP engine support - Yeun Foust 15:40:56 05/23/07 (1)
- Re: ZIIP engine support - Frank V. Schubert 14:26:53 05/25/07 (0)
OFFLOAD UNIT incorrect if numeric - Ron Fritz 14:34:36 05/22/07 (1)
- Re: OFFLOAD UNIT incorrect if numeric - Jim Walker 10:05:50 05/23/07 (0)
Disaster Recovery - Doug Oliverio 09:26:53 04/30/07 (1)
- Re: Disaster Recovery - Frank Schubert 22:50:21 04/30/07 (0)
soc9 from /da - Doug Oliverio 08:51:13 04/27/07 (4)
- Re: soc9 from /da - Doug Oliverio 10:58:45 04/27/07 (1)
  - Re: soc9 from /da - Frank Schubert 23:08:18 04/30/07 (0)
Testing IOF8B and getting NO MATCH - Heloisa Soares 13:25:19 04/24/07 (1)
- Re: Testing IOF8B and getting NO MATCH - Jim Walker 16:09:35 04/25/07 (0)
IOF WHO Command - Frank Borden 15:21:25 04/18/07 (1)
- Re: IOF WHO Command - Jim Walker 08:29:13 04/19/07 (0)
SUBMIT/EDIT commands broke after maint apply - Mike Schmutzok 15:43:33 04/04/07 (6)
- Re: SUBMIT/EDIT commands broke after maint apply - Jim Walker 08:43:07 04/09/07 (1)
  - Re: SUBMIT/EDIT commands broke after maint apply - Mike Schmutzok 10:13:00 04/10/07 (0)
- Re: SUBMIT/EDIT commands broke after maint apply - Jim Walker 09:09:03 04/07/07 (0)
- Re: SUBMIT/EDIT commands broke after maint apply - Mike Schmutzok 15:45:08 04/04/07 (2)
  - Re: SUBMIT/EDIT commands broke after maint apply - Mike Schmutzok 16:14:21 04/04/07 (1)
    - Re: SUBMIT/EDIT commands broke after maint apply - Alice Astle 16:01:55 04/05/07 (0)
IOF8C - Doug Oliverio 10:06:04 03/29/07 (1)
- Re: IOF8C - Jim Walker 13:22:35 03/29/07 (0)
pages col - Adam Kasper 17:32:20 03/28/07 (1)
- Re: pages col - Frank Schubert 14:56:14 03/29/07 (0)
Can M18NEWOP run zOS 1.6 after zOS 1.7 have been used - Lee Barnes 09:24:29 03/26/07 (2)
- Re: Can M18NEWOP run zOS 1.6 after zOS 1.7 have been used - Jim Walker 13:10:07 03/26/07 (1)
  - Re: Can M18NEWOP run zOS 1.6 after zOS 1.7 have been used - Lee Barnes 10:37:56 04/04/07 (0)
sporatic automatic console in iof8A - Dave Trigger 15:31:22 03/21/07 (1)
- Re: sporatic automatic console in iof8A - Jim Walker 11:50:06 03/22/07 (0)
I cann't see some STC's - Ralf 05:49:05 03/09/07 (1)
- Re: I cann't see some STC's - Frank Schubert 11:56:41 03/12/07 (0)
U8B2270 - sysaff - Doug Oliverio 08:55:45 03/06/07 (2)
- Re: U8B2270 - sysaff - Jim Walker 14:21:37 03/06/07 (0)
- Re: U8B2270 - sysaff - Doug Oliverio 09:00:54 03/06/07 (0)
joblog messages - Adam Kasper 16:47:54 03/05/07 (1)
- Re: joblog messages - Jim Walker 14:09:50 03/06/07 (0)
IKJ56479I COMMAND TSIDEQ NOT FOUND - Todd Smith 11:53:12 02/20/07 (1)
- Re: IKJ56479I COMMAND TSIDEQ NOT FOUND - Jim Walker 10:48:30 02/26/07 (0)
IOF 8A0 with current maintenace, problem with 1.7 Jes2 - Bill Long 22:33:28 02/16/07 (2)
- Re: IOF 8A0 with current maintenace, problem with 1.7 Jes2 - Frank Schubert 12:38:59 02/19/07 (1)
  - Re: IOF 8A0 with current maintenace, problem with 1.7 Jes2 - Todd Smith 11:20:32 07/31/07 (0)
SETLOGRC Command - Bill Hirsch 15:29:04 02/14/07 (1)
- Re: SETLOGRC Command - Frank Schubert 16:33:01 02/14/07 (0)
Using log to enter MVS commands - Lou DAgnolo 10:24:20 01/25/07 (2)
- Re: Using log to enter MVS commands - Jim Walker 11:31:37 01/29/07 (1)
  - Re: Using log to enter MVS commands - Jim Walker 08:53:44 01/31/07 (0)
Displaying output in LEAVE - Alice Astle 11:58:01 01/19/07 (1)
- Re: Displaying output in LEAVE - Frank Schubert 12:16:26 01/19/07 (0)
SLAMOPER user 3221 - Todd Smith 15:49:47 01/16/07 (2)
- Re: SLAMOPER user 3221 - Jim Walker 10:32:23 01/23/07 (1)
  - Re: SLAMOPER user 3221 - Todd Smith 11:47:12 02/20/07 (0)
SLAMPROC Indexing message - Todd Smith 15:33:40 01/16/07 (1)
- Re: SLAMPROC Indexing message - Jim Walker 16:24:13 01/16/07 (0)
Unable to find index dataset - Herb Volkert 14:56:26 01/12/07 (1)
- Re: Unable to find index dataset - Jim Walker 12:43:25 01/16/07 (0)
IOF SYSID - Doug Oliverio 09:57:44 12/27/06 (1)
- Re: IOF SYSID - Jim Walker 09:33:30 01/02/07 (0)
Screen Scrape? - Dan M. 09:02:44 12/13/06 (4)
- Re: Screen Scrape? - Jim Walker 09:10:59 12/14/06 (2)
  - Re: Screen Scrape? - Jim Walker 16:35:15 12/14/06 (1)
    - Re: Screen Scrape? - Jim Walker 10:33:02 12/15/06 (0)
IOFWTR and 7 digit USERID - Lee Barnes 11:24:05 12/12/06 (1)
- Re: IOFWTR and 7 digit USERID - Jim Walker 08:34:09 12/13/06 (0)
STATUS command - Ron Fritz 11:35:02 11/08/06 (1)
- Re: STATUS command - Jim Walker 16:13:47 11/14/06 (0)
IOF8B - Doug Oliverio 14:47:08 11/06/06 (1)
- Re: IOF8B - Jim Walker 16:03:00 11/06/06 (0)
Management of OPERLOG - Phillip Propst 10:59:01 10/26/06 (1)
- Re: Management of OPERLOG - Jim Walker 10:35:57 10/30/06 (0)
Available frame queue length - Mike Rounceville 08:38:16 10/26/06 (1)
- Re: Available frame queue length - Frank Schubert 11:11:45 10/30/06 (0)
IOF 8A compatibility - Doug Oliverio 11:48:41 09/13/06 (1)
- Re: IOF 8A compatibility - Jim Walker 15:48:51 09/13/06 (0)
SORT will error if there is nothing to sort - Jason Wallace 17:24:53 09/01/06 (2)
- found a workaround.. - Jason Wallace 20:45:47 10/02/06 (0)
- Re: SORT will error if there is nothing to sort - Jason Wallace 21:39:29 09/05/06 (0)
UPLOAD jobs do not have JES2 LOG - Lee Barnes 15:22:06 08/30/06 (2)
- Re: UPLOAD jobs do not have JES2 LOG - Lee Barnes 11:01:38 12/12/06 (0)
- Re: UPLOAD jobs do not have JES2 LOG - Jim Walker 16:12:50 09/01/06 (0)
IEE311I LOG PARAMETER MISSING - Bill Hirsch 15:30:59 08/24/06 (1)
- Re: IEE311I LOG PARAMETER MISSING - Jim Walker 16:55:54 08/24/06 (0)
Monitoring WTRID(SMTP) queued jobs - Len Rugen 20:51:21 08/20/06 (1)
- Re: Monitoring WTRID(SMTP) queued jobs - Jim Walker 17:28:44 08/21/06 (0)
Number of jobs that can be cancelled - Frank Chu 14:11:19 08/01/06 (2)
- Re: Number of jobs that can be cancelled - Jim Walker 13:50:54 08/03/06 (0)
Snap multiple jobs to a PDS with a clist - Jasen Kloeppel 08:19:09 08/01/06 (1)
- Re: Snap multiple jobs to a PDS with a clist - Jasen Kloeppel 09:43:00 08/01/06 (0)
Any plans to offer browser access to JES? - Terry 10:30:27 07/26/06 (3)
- Re: Any plans to offer browser access to JES? - Jim Walker 15:49:01 07/27/06 (1)
  - Re: Any plans to offer browser access to JES? - Jack Schudel 13:48:08 03/07/07 (0)
- Re: Any plans to offer browser access to JES? - Jim Walker 14:23:20 07/27/06 (0)
Problems with 8a cumfix - Dave Trigger 10:58:42 06/12/06 (2)
- Re: Problems with 8a cumfix - Jim Walker 09:38:59 06/14/06 (0)
Is there a way to run a parallel test on the same IOF release level? - Bill Hirsch 16:06:35 05/18/06 (1)
- Re: Is there a way to run a parallel test on the same IOF release level? - Jim Walker 09:33:15 05/19/06 (0)
jobname-list in IOF call rc=7096 - Mike Duffey 17:07:36 05/16/06 (1)
- Re: jobname-list in IOF call rc=7096 - Jim Walker 09:57:57 05/17/06 (0)
ACF2 rule that permits cancelling only jobs from a particular Destination - Bill Hirsch 12:34:05 05/15/06 (1)
- Re: ACF2 rule that permits cancelling only jobs from a particular Destination - Jim Walker 09:30:51 05/16/06 (0)
iof8a cumulative fix file - Doug Oliverio 06:58:25 04/11/06 (1)
- Re: iof8a cumulative fix file - Jim Walker 13:48:31 04/11/06 (0)
IOF8A CN - MVS Console - Doug Oliverio 07:47:03 04/05/06 (1)
- Re: IOF8A CN - MVS Console - Jim Walker 16:12:47 04/06/06 (0)
iof8a: invalid record format... - Ralf 02:08:26 04/05/06 (2)
- Re: iof8a: invalid record format... - Jim Walker 14:03:08 05/11/06 (0)
- Re: iof8a: invalid record format... - Jim Walker 09:08:13 04/07/06 (0)
OA14340 - Joe D'Alessandro 09:00:48 03/28/06 (1)
- Re: OA14340 - Jim Walker 09:10:10 04/07/06 (0)
R command issued produces nothing under 8A - Bill Long 13:51:52 03/24/06 (2)
- Re: R command issued produces nothing under 8A - Jim Walker 13:46:33 03/28/06 (0)
IOF Command Compatibility - Bill Hirsch 14:17:00 03/22/06 (2)
- Re: IOF Command Compatibility - Jim Walker 22:48:46 03/23/06 (0)
iof feature question - Doug Oliverio 10:27:15 03/10/06 (1)
- Re: iof feature question - Jim Walker 17:13:16 03/10/06 (0)
iof 8A refused at - Ralf 06:41:12 03/10/06 (3)
- Re: iof 8A refused at - Jim Walker 17:10:39 03/10/06 (2)
  - Re: iof 8A refused at - Jim Walker 20:53:34 03/14/06 (1)
    - iof 8A works fine... - Ralf 09:28:31 03/15/06 (0)
Question about IOF System Monitor - Rodney Frost 08:44:41 02/20/06 (1)
- Re: Question about IOF System Monitor - Frank Schubert 15:53:38 02/20/06 (0)
-- IOF Option Menu -------------- - Bill Long 11:29:28 02/16/06 (2)
- Re: -- IOF Option Menu -------------- - Jim Walker 14:47:51 02/16/06 (0)
- Re: -- IOF Option Menu showing Invalid VALUE - Bill Long 11:32:08 02/16/06 (0)
Manage Outstanding Replies When Viewing SYSLOG with the IOF /L command - Bill Hirsch 17:04:20 02/08/06 (1)
- Re: Manage Outstanding Replies When Viewing SYSLOG with the IOF /L command - Jim Walker 10:28:11 02/09/06 (0)
Highlighting messages in IOF SYSLOG or OPERLOG - Bill Hirsch 16:56:29 02/08/06 (3)
- Re: Highlighting messages in IOF SYSLOG or OPERLOG - Jim Walker 11:22:32 02/09/06 (2)
  - Re: Highlighting messages in IOF SYSLOG or OPERLOG - Bill Hirsch 15:28:44 02/09/06 (1)
    - Re: Highlighting messages in IOF SYSLOG or OPERLOG - Jim Waler 16:01:27 02/09/06 (0)
Running Job Field Heading - Arturo 22:58:22 01/12/06 (2)
- Re: Running Job Field Heading - Frank Schubert 23:10:16 01/13/06 (1)
  - Re: Running Job Field Heading - Arturo 19:55:06 01/14/06 (0)
IOF on an IBM SystemPac for z/OS V1.7 - Jim Robins 16:36:00 01/10/06 (1)
- Re: IOF on an IBM SystemPac for z/OS V1.7 - Jim Walker 12:14:07 01/12/06 (0)
JCL - Spoorthy 06:33:32 12/28/05 (1)
- Re: JCL - Jim Walker 12:18:06 01/12/06 (0)
CONFIRM YES/NO - Bill Hirsch 17:35:10 12/05/05 (2)
- Re: CONFIRM YES/NO - Jim Walker 14:47:57 12/07/05 (0)
- Re: CONFIRM ON/OFF - Bill Hirsch 17:37:59 12/05/05 (0)
Custon Invocation - Steve McCarthy 10:29:01 11/23/05 (1)
- Re: Custon Invocation - Jim Walker 09:32:31 12/01/05 (0)
ED(it) Comand Access - Don Douglas 14:13:50 11/02/05 (1)
- Re: ED(it) Comand Access - Jim Walker 16:35:57 11/07/05 (0)
REXX TSICOPY for INPUTQ panel - Mark Miller 14:56:20 10/28/05 (1)
- Re: REXX TSICOPY for INPUTQ panel - Jim Walker 10:52:21 11/01/05 (0)
SYSIOF LOGINDEX dataset full - Steve Horein 18:17:27 10/13/05 (2)
- Re: SYSIOF LOGINDEX dataset full - Jim Walker 11:46:09 10/17/05 (1)
  - Re: SYSIOF LOGINDEX dataset full - Steve Horein 11:19:38 10/20/05 (0)
IOF MVS command response display - Bernie Grandy 14:37:32 10/13/05 (2)
- Re: IOF MVS command response display - Jim Walker 11:41:44 10/17/05 (1)
  - Re: IOF MVS command response display - Jim Walker 16:29:25 10/17/05 (0)
PID for Unix processes - Bobby Bauer 09:05:45 10/12/05 (1)
- Re: PID for Unix processes - Jim Walker 13:28:37 10/12/05 (0)
New Hardware 2094 - Phillip Propst 15:13:54 10/05/05 (1)
- Re: New Hardware 2094 - Steve BlankinshipJES2 10:49:17 10/06/05 (0)
Enclave report and RESET capability - Bill Long 17:43:43 10/04/05 (1)
- Re: Enclave report and RESET capability - Jim Walker 14:30:22 10/05/05 (0)
Job Owner In Control Block Other Than JQE? - Jim Blalock 15:54:51 09/22/05 (2)
- Re: Job Owner In Control Block Other Than JQE? - Jim Walker 16:27:44 09/22/05 (0)
- Re: Job Owner In Control Block Other Than JQE? - Jim Blalock 15:56:01 09/22/05 (0)
IOF access and RACF - Brian Stahl 19:08:32 09/19/05 (1)
- Re: IOF access and RACF - Jim Walker 15:55:15 09/20/05 (0)
Displaying Data on a Panel from IOF/Rexx Exec - Charles Wiliams 18:04:49 09/16/05 (1)
- Re: Displaying Data on a Panel from IOF/Rexx Exec - Jim Walker 16:27:28 09/20/05 (0)
zAAP data - Donald Likens 16:00:47 09/16/05 (1)
- Re: zAAP data - Jim Walker 16:46:23 09/20/05 (0)
1 byte Console IDs - Donald Likens 13:26:28 09/16/05 (1)
- Re: 1 byte Console IDs - Steve Blankinship 14:14:45 09/16/05 (0)
TSICOPY - All Column Names and Values? - Todd Lucas 15:42:54 09/14/05 (5)
- Re: TSICOPY - All Column Names and Values? - Jim Walker 09:42:28 09/15/05 (4)
  - Re: TSICOPY - All Column Names and Values? - Todd Lucas 20:02:41 09/16/05 (3)
    - Re: TSICOPY - All Column Names and Values? - Jim Walker 09:38:20 09/22/05 (2)
      - Re: TSICOPY - All Column Names and Values? - Todd Lucas 10:13:55 09/23/05 (1)
        
        Re: TSICOPY - All Column Names and Values? - Jim Walker 16:34:02 10/17/05 (0)
Indexing old logs after new version of JES installed - Kevin Tieszen 18:04:21 09/12/05 (1)
- Re: Indexing old logs after new version of JES installed - Steve Blankinship 12:19:25 09/13/05 (0)
Can I re-set the logical command/option seperator character - Robin Ryerse 13:37:15 09/09/05 (1)
- Re: Can I re-set the logical command/option seperator character - Jim Walker 16:55:12 09/20/05 (0)
IOFPROF - Jason Shell 13:54:59 08/25/05 (2)
- Re: IOFPROF - Frank Schubert 12:01:11 09/06/05 (0)
- Re: IOFPROF - Jason Shell 13:46:22 08/30/05 (0)
IOF 7K - Malcolm Meeker 09:20:27 08/15/05 (1)
- Re: IOF 7K - Jim Walker 11:54:14 08/16/05 (0)
CICS transaction to query IOF - Alton Mines 15:15:14 08/02/05 (1)
- Re: CICS transaction to query IOF - Jim Prestwood 15:42:17 08/03/05 (0)
At Logon - Jason Shell 08:58:41 06/20/05 (3)
- Re: At Logon - Jason Shell 10:06:13 06/20/05 (2)
  - Re: At Logon - Jim Walker 12:12:35 06/20/05 (1)
    - Re: At Logon - Jason Shell 12:50:45 06/20/05 (0)
TSS violations written to user, should be suppressed - Dave Trigger 10:13:05 06/06/05 (2)
- Re: TSS violations written to user, should be suppressed - Jim Walker 17:26:05 06/06/05 (0)
- TSS violations written to user, should be suppressed - Dave Trigger 10:18:52 06/06/05 (0)
Snap datasets - Jason Shell 15:31:43 05/12/05 (4)
- Re: Snap datasets - Jim Walker 15:24:58 05/18/05 (0)
- Re: Snap datasets - Jason Shell 10:45:54 05/13/05 (2)
  - Re: Snap datasets - Jason Shell 09:01:37 05/16/05 (1)
    - Re: Snap datasets - Jason Shell 10:50:37 05/17/05 (0)
error starting syslog and operlog - Ralf 04:57:47 05/06/05 (1)
- Re: error starting syslog and operlog - Jim Walker 10:37:47 05/06/05 (0)
Using CART to differentiate between 'real' Master and IOF master Console? - John Shaw 04:21:14 05/06/05 (1)
- Re: Using CART to differentiate between 'real' Master and IOF master Console? - Frank Schubert 15:09:05 05/06/05 (0)
How to specify size of dataset in iofwtr - Sam 15:50:43 04/19/05 (1)
- Re: How to specify size of dataset in iofwtr - Jim Walker 20:24:55 04/19/05 (0)
JAROFFLD EXCL question - Jasen Kloeppel 11:40:12 04/15/05 (2)
- Re: JAROFFLD EXCL question - Jim Walker 09:30:39 04/18/05 (0)
TIME display wrong after change to daylight time - Jim Walker 10:13:37 04/05/05 (1)
- Re: TIME display wrong after change to daylight time - Jim Walker 20:16:20 04/12/05 (0)
B23ALLOW Group UADS definition? - Steve Horein 17:12:15 03/15/05 (1)
- Re: B23ALLOW Group UADS definition? - Frank V. Schubert 15:08:26 03/16/05 (0)
RC(-3) on IOF command - Bill George 10:29:04 03/10/05 (1)
- Re: RC(-3) on IOF command - Jim Walker 10:25:13 03/14/05 (0)
Spool utilisation - Peter Schwab 05:16:40 02/23/05 (1)
- Re: Spool utilisation - Jim Walker 10:17:00 02/24/05 (0)
Obtain USERDTxx info via TSICOPY CLIST command. - Todd Lucas 14:34:28 02/17/05 (4)
- Re: Obtain USERDTxx info via TSICOPY CLIST command. - Jim Walker 13:31:59 02/21/05 (3)
  - USERDTxx info via TSICOPY command in BATCH - Todd Lucas 15:24:53 02/24/05 (1)
    - Re: USERDTxx info via TSICOPY command in BATCH - Kris Ferrier 19:09:09 03/28/06 (0)
  - Re: Obtain USERDTxx info via TSICOPY CLIST command. - Todd Lucas 12:40:24 02/23/05 (0)
UPLOAD - Lee Barnes 12:17:51 02/10/05 (1)
- Re: UPLOAD - Jim Walker 12:20:28 02/11/05 (0)
Monitored jobs - Steve Horein 13:52:46 02/08/05 (2)
- Re: Monitored jobs - Jim Walker 14:30:32 02/09/05 (1)
  - Re: Monitored jobs - Steve Horein 16:48:02 02/09/05 (0)
Display output jobs statistics for userid - Peter Schwab 08:55:59 02/01/05 (2)
- Re: Display output jobs statistics for userid - Jim Walkert 10:56:34 02/01/05 (1)
  - Re: Display output jobs statistics for userid - Jim Walker 10:45:10 02/02/05 (0)
Access PDDB elements from IOF Group Clist - Kevin Muzin 16:46:16 12/30/04 (1)
- Re: Access PDDB elements from IOF Group Clist - Jim Walker 12:29:38 01/03/05 (0)
IOF 7H & 7J - Ibrahim Alshiban 06:27:18 12/22/04 (1)
- Re: IOF 7H & 7J - Jim Walker 16:43:38 12/22/04 (0)
iof7j changes in multiple submits - doug oliverio 08:36:25 11/23/04 (3)
- Re: iof7j changes in multiple submits - Jim Walker 15:05:13 11/30/04 (1)
  - Re: iof7j changes in multiple submits - Jim Walker 14:58:14 02/21/05 (0)
- Re: iof7j changes in multiple submits - Jim Walker 12:39:50 11/23/04 (0)
Sort changes in IOF7J - Doug Oliverio 09:28:01 11/11/04 (1)
- Re: Sort changes in IOF7J - Jim Walker` 08:53:02 11/15/04 (0)
A03 abend in REXX / IOF running in TSO batch - Cristian Popescu 14:40:09 11/09/04 (2)
- Re: A03 abend in REXX / IOF running in TSO batch - Steve Blankinship 16:21:42 11/09/04 (1)
  - Re: A03 abend in REXX / IOF running in TSO batch - Cristian Popescu 10:41:05 11/12/04 (0)
slamrun error message - Doug Oliverio 14:15:07 11/05/04 (2)
- Re: slamrun error message - Jim Walker 08:37:27 11/08/04 (0)
- Re: slamrun error message - Steve Blankinship 16:38:17 11/05/04 (0)
SLAMRUN and the 24 hour log versus 1 hour - Bill Long 14:31:30 10/20/04 (1)
- Re: SLAMRUN and the 24 hour log versus 1 hour - Jim Walker 15:12:34 10/20/04 (0)
Batch Snap - Clist problem - Sumit 19:54:31 10/05/04 (3)
- Re: Batch Snap - Clist problem - Jim Walker 09:33:19 10/06/04 (1)
  - Re: Batch Snap - Clist problem - sumit 13:52:46 10/06/04 (0)
- Re: Batch Snap - Clist problem - Sumit 19:58:42 10/05/04 (0)
Runing REXX exec in batch mode - Himanshu Gupta 14:58:03 09/14/04 (5)
- Re: Running REXX exec in batch mode - Steve Blankinship 15:18:14 09/15/04 (4)
  - Re: Running REXX exec in batch mode - Himanshu Gupta 13:26:16 09/16/04 (3)
    - Re: Running REXX exec in batch mode - Himanshu Gupta 13:45:16 09/16/04 (2)
      - Re: Running REXX exec in batch mode - Jim Walker 14:45:05 09/16/04 (1)
        
        Re: Running REXX exec in batch mode - Himanshu Gupta 14:50:12 09/16/04 (0)
PR command inside a DDNAME - Adam Kasper 18:38:52 09/09/04 (3)
- Re: PR command inside a DDNAME - Jim Walker 13:52:07 09/13/04 (0)
- Re: PR command inside a DDNAME - Jim Walker 09:47:06 09/10/04 (1)
  - Re: PR command inside a DDNAME - Jim Walker 09:54:42 09/10/04 (0)
M14COPY Compress - Rhett Goby 16:51:15 09/09/04 (1)
- Re: M14COPY Compress - Steve Blankinship 17:14:41 09/09/04 (0)
%scanreg doesn't work with 7J - Ralf 07:35:15 09/03/04 (2)
- Re: %scanreg doesn't work with 7J - Jim Walker 10:39:07 09/03/04 (1)
  - Re: It works :) - Ralf 03:12:51 09/06/04 (0)
sdsf compatibility - doug oliverio 13:11:50 08/27/04 (1)
- Re: sdsf compatibility - Steve Blankinship 11:36:09 09/02/04 (0)
Snapping IOF list menu - Himanshu Gupta 14:52:28 08/20/04 (2)
- Re: Snapping IOF list menu - Frank Schubert 16:57:33 08/23/04 (1)
  - Re: Snapping IOF list menu - Louis Moore 20:32:05 12/16/05 (0)
Does the EXCLUDE command support lower case letters - Mike Duffey 13:12:36 08/12/04 (2)
- Re: Does the EXCLUDE command support lower case letters - Jim Walker 15:25:42 08/12/04 (0)
- Re: Does the EXCLUDE command support lower case letters - Steve Blankinship 15:03:27 08/12/04 (0)
Can the COMMENT field be set by a JCL statement? - Mike Duffey 13:09:25 08/12/04 (5)
- Re: Can the COMMENT field be set by a JCL statement? - Jim Walker 14:33:52 08/12/04 (4)
  - Re: Can the COMMENT field be set by a JCL statement? - Mike Duffey 15:12:07 08/12/04 (3)
    - Re: Can the COMMENT field be set by a JCL statement? - Jim Walker 15:38:27 08/12/04 (1)
      - Re: Can the COMMENT field be set by a JCL statement? - Mike Duffey 16:11:57 08/12/04 (0)
REFUSED Commands: CN , DR, MAS, & SR - Arturo 10:33:23 07/30/04 (2)
- Re: REFUSED Commands: CN , DR, MAS, & SR - Jim Walker 14:31:16 07/30/04 (1)
  - Re: REFUSED Commands: CN , DR, MAS, & SR - Arturo 19:42:38 08/02/04 (0)
IOF fixes 7H - Brian Stahl 09:21:24 07/28/04 (1)
- Re: IOF fixes 7H - Jim Walker 10:09:35 07/28/04 (0)
SNAP output to a PDS dataset - Bill Long 14:56:44 07/20/04 (1)
- Re: SNAP output to a PDS dataset - Jim Walker 10:15:15 07/21/04 (0)
typrun - palakkal zaheer 12:38:16 07/13/04 (2)
- Re: typrun - palakkal zaheer 12:41:17 07/13/04 (1)
  - Re: typrun - Steve Blankinship 15:30:29 07/13/04 (0)
Is it possible to snap a job list to a dataset? - Gary Bissonette 20:31:20 07/08/04 (2)
- Re: Is it possible to snap a job list to a dataset? - Jim Walker 10:32:03 07/09/04 (1)
  - Re: Is it possible to snap a job list to a dataset? - Jim Walker 11:57:51 07/14/04 (0)
IOF is getting a FF3 on z/OS 1.4 - Tom Klinge 09:48:11 07/08/04 (1)
- Re: IOF is getting a FF3 on z/OS 1.4 - Jim Walker 13:13:37 07/08/04 (0)
Snapping multiple jobs - Himanshu Gupta 13:31:10 05/26/04 (2)
- Re: Snapping multiple jobs - Himanshu Gupta 14:31:24 05/26/04 (1)
  - Re: Snapping multiple jobs - Jim Walker 17:05:02 05/27/04 (0)
Error 10626 - charles Laflamme 10:06:01 05/23/04 (1)
- Re: Error 10626 - Jim Walker 09:22:22 05/25/04 (0)
Protecting the EVERY command - Joseph Sumi 15:54:22 04/19/04 (2)
- Re: Protecting the EVERY command - Steve Blankinship 11:39:50 04/20/04 (1)
  - Re: Protecting the EVERY command - Joseph Sumi 09:06:34 04/21/04 (0)
Batch Execution - Joe Simon 15:18:25 04/12/04 (1)
- Re: Batch Execution - Jim Walker 09:54:12 04/13/04 (0)
IOFWTR? - I. Ozuna 15:23:57 04/01/04 (7)
- Re: IOFWTR? - Jim Walker 15:38:00 04/01/04 (6)
  - Re: IOFWTR? - I. Ozuna 15:56:46 04/01/04 (5)
    - Re: IOFWTR? - Jim Walker 16:16:39 04/01/04 (3)
      - SNAPDS CLIST to snap output from a running task - Jim Walker 10:19:03 04/02/04 (2)
        
        Re: SNAPDS CLIST to snap output from a running task - I. Ozuna 15:00:50 04/02/04 (1)
        
        Re: SNAPDS CLIST to snap output from a running task - Anuj 15:49:16 08/02/07 (0)
Exclude Limit - Ralf 07:01:24 03/04/04 (4)
- Re: Exclude Limit - Jim Walker 09:41:03 03/04/04 (3)
  - Re: Exclude Limit - Ralf 03:13:42 03/05/04 (2)
    - Re: Exclude Limit - Jim Walker 09:30:01 03/05/04 (1)
      - Re: Exclude Limit - Ralf 04:35:40 03/08/04 (0)
IOF RACF Security questions - Steve Doonan 22:08:58 03/01/04 (2)
- Re: IOF RACF Security questions - Frank V. Schubert 10:48:31 03/02/04 (0)
CA-TSS 5.2 and IOF - Vinny Senatore 09:09:21 12/30/03 (2)
- Re: CA-TSS 5.2 and IOF - Frank V. Schubert 11:15:21 12/30/03 (0)
IOF/TSO 7H maintenance - Michael Walker 12:30:04 12/10/03 (1)
- Re: IOF/TSO 7H maintenance - Jim Walker 16:18:43 12/10/03 (0)
Cancel running STC - J. Walter 01:58:28 12/04/03 (1)
- Re: Cancel running STC - Steve Blankinship 09:49:25 12/04/03 (0)
JES2 Service Level - Bob Chapman 10:50:36 11/17/03 (3)
- Re: JES2 Service Level - Bob Chapman 10:54:18 11/17/03 (2)
  - Re: JES2 Service Level - Jim Walker 15:58:42 11/18/03 (1)
date on output jobs screen - Robert D. Blanding 14:56:12 10/27/03 (1)
- Re: date on output jobs screen - Jim Walker 16:43:51 10/27/03 (0)
"Selective" security - Dave Trigger 11:05:23 10/20/03 (2)
- Re: "Selective" security - Frank V. Schubert 11:00:29 10/24/03 (0)
problems or limitations with ISPSTART???? - jacki rinaldi 13:20:47 10/17/03 (1)
- Re: problems or limitations with ISPSTART???? - Frank V. Schubert 18:22:21 10/20/03 (0)
Using IOF variables in a CLIST - Sonny Dunaway 10:47:39 10/08/03 (1)
- Re: Using IOF variables in a CLIST - Jim Walker 16:01:19 10/08/03 (0)
Problems with IOFWHERE - Dave Trigger 11:25:07 10/06/03 (1)
- Re: Problems with IOFWHERE - Frank V. Schubert 12:06:38 10/06/03 (0)
SDSF to IOF conversion - Herb Volkert 10:17:59 09/25/03 (2)
- Re: SDSF to IOF conversion - ken whelan 17:28:00 05/02/05 (0)
- Re: SDSF to IOF conversion - Jim Walker 11:13:21 09/25/03 (0)
TSIEXEC Browse malfunction - Sonny Dunaway 14:28:05 09/19/03 (1)
- Re: TSIEXEC Browse malfunction - Frank V. Schubert 16:27:00 09/19/03 (0)
IOF and RACF viewing output - Brian Stahl 11:51:09 09/15/03 (2)
- Re: IOF and RACF viewing output - Jim Walker 09:22:34 09/16/03 (1)
  - Re: IOF and RACF viewing output - Jim Walker 10:58:18 09/16/03 (0)
scan an IOF file - Pei-Lan Morgenroth 14:10:16 09/08/03 (4)
- Re: scan an IOF file - Jim Walker 10:56:10 09/09/03 (3)
  - Re: scan an IOF file - pei-lan morgenroth 14:34:00 09/09/03 (2)
    - Re: scan an IOF file - Jim Walker 17:26:22 09/09/03 (0)
Saving Sort order - Noel Maher 11:53:11 09/01/03 (3)
- Re: Saving Sort order - Jim Walker 09:08:40 09/02/03 (2)
  - Re: Saving Sort order - Noel Maher 10:27:20 09/02/03 (1)
    - Re: Saving Sort order - Jim Walker 16:57:17 09/02/03 (0)
missing position in input queue - Mark Lewin 17:09:43 08/07/03 (3)
- Re: missing position in input queue - Jim Walker 20:42:23 08/07/03 (2)
  - Re: missing position in input queue - Mark Lewin 13:43:52 08/08/03 (1)
    - Re: missing position in input queue - Jim Walker 14:34:13 08/08/03 (0)
Security information from a user session - Gary Bissonette 15:10:05 08/04/03 (3)
- Re: Security information from a user session - Steve Blankinship 16:17:46 08/04/03 (2)
  - Re: Security information from a user session - Gary Bissonette 16:52:55 08/04/03 (4)
    - Re: Security information from a user session - Steve Blankinship 09:51:55 08/05/03 (0)
IOF server - Don Williams 15:45:01 07/29/03 (4)
- Re: IOF server - Jim Walker 16:56:22 07/29/03 (3)
  - Re: IOF server - Donald B Williams 09:22:44 07/30/03 (2)
    - Re: IOF server - Jim Walker 09:04:31 12/03/03 (0)
$HASP622 - Don Williams 11:38:18 07/29/03 (4)
- Re: $HASP622 - Jim Walker 14:55:58 07/29/03 (3)
  - Re: $HASP622 - Don Williams 15:32:55 07/29/03 (2)
    - Re: $HASP622 - Jim Walker 16:59:02 07/29/03 (1)
      - Re: $HASP622 - Don Williams 09:03:42 07/30/03 (0)
Moving output jobs from one class to another - Travis 15:58:57 07/22/03 (1)
- Re: Moving output jobs from one class to another - Jim Walker 16:38:53 07/22/03 (0)
$TSI$.PROFILE IOF dataset - Brian Stahl 10:43:56 06/27/03 (1)
- Re: $TSI$.PROFILE IOF dataset - Jim Walker 13:17:52 06/27/03 (0)
IOF version 7H & os/390 2.10 64 bit addressing - Brian Stahl 09:18:22 06/24/03 (1)
- Re: IOF version 7H & os/390 2.10 64 bit addressing - Steve Blankinship 11:59:00 06/24/03 (0)
OMVS PROCESSES AND ENCLAVES - ED G. 07:55:20 06/19/03 (3)
- Re: OMVS PROCESSES AND ENCLAVES - Jim Walker 16:28:15 06/25/03 (2)
  - Re: OMVS PROCESSES AND ENCLAVES - Jim Walker 14:36:17 10/05/05 (1)
    - Re: OMVS PROCESSES AND ENCLAVES - Jim Walker 09:26:37 02/02/06 (0)
WLM SCHENV & RESOURCES - ED G. 07:19:54 06/19/03 (1)
- Re: WLM SCHENV & RESOURCES - Jim Walker 16:26:47 06/25/03 (0)
IOF RC(1503) - Bob Chapman 11:27:58 06/03/03 (1)
- Re: IOF RC(1503) - Steve Blankinship 17:27:43 06/03/03 (0)
CLIST IOFLISTG any command delay possible? - Deanie Lee 10:51:20 05/28/03 (2)
- Re: CLIST IOFLISTG any command delay possible? - Jim Walker 14:05:53 05/28/03 (0)
TSO Command for Output Held Class I - Van Penton 11:52:32 05/19/03 (2)
- Re: TSO Command for Output Held Class I - Jim Walker 15:31:36 05/19/03 (1)
  - Re: TSO Command for Output Held Class I - Van Penton 16:02:52 05/19/03 (0)
Dispatching priority - Michiel van Kooten 07:31:23 05/16/03 (1)
- Re: Dispatching priority - Steve Blankinship 10:15:22 05/16/03 (0)
Can IOFWTR put its output into a file in a directory in an HFS? - Ed Webb 14:58:20 04/11/03 (4)
- Re: Can IOFWTR put its output into a file in a directory in an HFS? - Ed Webb 14:59:50 04/11/03 (3)
  - Re: Can IOFWTR put its output into a file in a directory in an HFS? - Jim Walker 16:35:42 04/16/03 (0)
  - Re: Can IOFWTR put its output into a file in a directory in an HFS? - Ed Webb 09:31:36 04/16/03 (1)
running IOF on 64-bit processor - Jason Shell 14:04:15 04/10/03 (1)
- Re: running IOF on 64-bit processor - Steve Blankinship 14:42:26 04/10/03 (0)
OS/390 2.10 64-bit Architecture - Ed Burns 13:17:00 04/10/03 (1)
- Re: OS/390 2.10 64-bit Architecture - Steve Blankinship 14:30:11 04/10/03 (0)
reading sysout in current active batch job - Bill Reynolds 16:23:35 04/09/03 (1)
- Re: reading sysout in current active batch job - Jim Walker 10:57:48 04/10/03 (0)
Monitor command usage controlled by RACF groupid - Jack Schudel 14:51:46 04/07/03 (1)
- Re: Monitor command usage controlled by RACF groupid - Jim Walker 10:56:35 04/08/03 (0)
IOF expiry - Dave Trigger 10:18:55 03/31/03 (1)
- Re: IOF expiry - Steve Blankinship 12:10:22 03/31/03 (0)
IOFWHERE command after LNKLST activate - Mark Snelder 05:23:48 03/19/03 (2)
- Re: IOFWHERE command after LNKLST activate - Frank V. Schubert 11:31:31 03/19/03 (0)
Snap Results in Premature End of Page & Blank Pages - Van Penton 16:14:03 03/12/03 (1)
- Re: Snap Results in Premature End of Page & Blank Pages - Jim Walker 11:23:13 03/13/03 (0)
compare two records - Mahesh 00:24:07 03/07/03 (1)
- Re: compare two records - Frank Schubert 10:40:08 03/07/03 (0)
How to extract a Job's particular Sysout using CLIST or REXX or Cobol program in IOF environment - Raghu 08:09:10 02/21/03 (2)
- Re: How to extract a Job's particular Sysout using CLIST or REXX or Cobol program in IOF environment - Jim Walker 14:57:13 02/21/03 (1)
  - Re: How to extract a Job's particular Sysout using CLIST or REXX or Cobol program in IOF environment - Jim Walker 11:24:55 02/24/03 (0)
Printer Device Modify - Todd Lucas 13:30:08 02/13/03 (1)
- Re: Printer Device Modify - Jim Walker 16:46:53 02/13/03 (0)
OUTQUE actions - Frank Richardson 10:54:20 02/12/03 (2)
- Re: OUTQUE actions - Jim Walker 16:53:36 02/13/03 (1)
  - Re: OUTQUE actions - Frank Richardson 13:40:28 02/17/03 (0)
Viewing selected people's jobs. - Brett Phipps 10:28:02 02/07/03 (2)
- Re: Viewing selected people's jobs. - Steve Blankinship 11:45:52 02/07/03 (1)
  - Re: Viewing selected people's jobs. - Brett Phipps 15:26:14 02/07/03 (0)
I need to view Machine and ASA print control characters directly in Sysout . - Richard A. Landkamer 11:29:52 02/06/03 (1)
- Re: I need to view Machine and ASA print control characters directly in Sysout . - Steve Blankinship 14:14:36 02/06/03 (0)
IOF with os390 2.4 and os390 2.9 - Carlos O'Byrne 16:23:10 02/03/03 (1)
- Re: IOF with os390 2.4 and os390 2.9 - Steve Blankinship 17:33:23 02/03/03 (0)
JES messages - Magesh 01:59:53 01/30/03 (1)
- Re: JES messages - Jim Walker 09:13:57 01/30/03 (0)
Job status through the ftp command - Suganya 08:55:05 01/27/03 (1)
- Re: Job status through the ftp command - Jim Walker 11:49:02 01/28/03 (0)
Edit initial macro - Thom Copenhaver 14:52:58 01/23/03 (2)
- Re: Edit initial macro - Jim Walker 17:25:51 01/25/03 (0)
- Re: Edit initial macro (clarification) - Thom Copenhaver 15:08:47 01/23/03 (0)
Snapping of selected IOF expanded JCL to dataset - Sangam 12:42:37 01/20/03 (2)
- Re: Snapping of selected IOF expanded JCL to dataset - Jim Walker 15:11:36 01/20/03 (1)
  - Re: Snapping of selected IOF expanded JCL to dataset - Jim Walker 10:50:56 01/21/03 (0)
Snap to Sysout Dataset. - Jag Shah 09:32:30 01/13/03 (2)
- Re: Snap to Sysout Dataset. - Jim Walker 09:33:36 01/14/03 (1)
  - Re: Snap to Sysout Dataset. - Jim Walker 15:38:55 01/15/03 (0)
MCS EXTENED - Peter Koppany 14:43:46 01/07/03 (1)
- Re: MCS EXTENED - Jim Prestwood 12:40:49 01/08/03 (0)
MVS Command Limiting - Perry West 10:33:48 12/30/02 (1)
- Re: MVS Command Limiting - Jim Walker 11:05:31 01/02/03 (0)
Limiting the AT command - Lou dagnolo 11:44:06 12/23/02 (1)
- Re: Limiting the AT command - Jim Walker 12:38:08 12/23/02 (0)
IOF Regression Test or IVP - Bob Chapman 11:43:24 12/13/02 (1)
- Re: IOF Regression Test or IVP - Jim Walker 15:56:17 12/13/02 (0)
$TOJ HASX05C - Robert Blanding 12:46:25 12/12/02 (1)
- Re: $TOJ HASX05C - Jim Walker 15:57:10 12/12/02 (0)
IOF 7h and patches - Dave Trigger 15:47:12 11/26/02 (1)
- Re: IOF 7h and patches - Jim Walker 10:41:53 11/27/02 (0)
Process the "Job list menu" - Joop Ammelaan 08:55:02 11/22/02 (2)
- Re: Process the "Job list menu" - Joop Ammerlaan 09:20:43 11/22/02 (0)
- Re: Process the "Job list menu" - Jim Walker 09:13:43 11/22/02 (0)
Security Jobclasses - Bob Hartsell 18:20:31 11/20/02 (1)
- Re: Security Jobclasses - Jim Walker 12:32:30 11/21/02 (0)
Output protection - Jason Shell 15:22:16 11/18/02 (3)
- Re: Output protection - Jim Walker 17:05:06 11/19/02 (2)
  - Re: Output protection - Jason Shell 10:39:39 11/20/02 (1)
    - Re: Output protection - Jim Walker 17:13:27 11/20/02 (0)
Field name for "JOB RESULT" - TJ Hu 14:25:23 11/08/02 (2)
- Re: Field name for "JOB RESULT" - Jim Walker 14:18:06 11/18/02 (0)
- Re: Field name for "JOB RESULT" - TJ Hu 15:04:24 11/08/02 (0)
IOF7G - Off Support - Walter Henry 14:28:42 11/05/02 (1)
- Re: IOF7G - Off Support - Jim Walker 14:42:25 11/05/02 (0)
z800 series - Jason Shell 14:40:47 10/28/02 (1)
- Re: z800 series - Steve Blankinship 10:48:31 10/29/02 (0)
'Insufficient memory to perform requested function' message when displaying NJE - David Kuhn Provident Bank 09:17:54 10/17/02 (2)
- Re: 'Insufficient memory to perform requested function' message when displaying NJE - Jim Walker 11:20:12 10/17/02 (1)
  - Re: 'Insufficient memory to perform requested function' message when displaying NJE - David Kuhn 10:49:26 10/23/02 (0)
IOF equivalent of SDSF "STATUS" (ARMELEM) - Dave Trigger 14:09:09 10/15/02 (2)
- Re: IOF equivalent of SDSF "STATUS" (ARMELEM) - Frank Schubert 11:23:19 10/17/02 (1)
  - Re: IOF equivalent of SDSF "STATUS" (ARMELEM) - Frank V. Schubert 11:41:21 03/19/03 (0)
Can I print a partial amount of an output from IOF without printing the entire output? - Brad L. Ewald - Philip Morris IS Support 15:14:30 09/25/02 (1)
- Re: Can I print a partial amount of an output from IOF without printing the entire output? - Jim Walker 16:02:11 09/25/02 (0)
Returning info from IOF - Bob Bridges 13:37:42 09/18/02 (3)
- Re: Returning info from IOF - Jim Walker 15:29:23 09/18/02 (2)
  - Returning info from IOF - Bob Bridges 15:46:58 09/18/02 (1)
    - Re: Returning info from IOF - Jim Walker 15:54:15 09/18/02 (0)
SNAP SYSIN datasets - Richard Silvers 13:30:27 09/16/02 (1)
- Re: SNAP SYSIN datasets - Jim Walker 14:18:03 09/16/02 (0)
Rexx to look for a running job - DALE HOFMAIER 11:12:02 08/30/02 (1)
- Re: Rexx to look for a running job - Jim Walker 09:11:40 09/03/02 (0)
TSICOPY not found ..... - Michiel van Kooten 02:22:45 08/09/02 (1)
- Re: TSICOPY not found ..... - Jim Walker 12:24:36 08/09/02 (0)
Expansion of jcl from REXX using IOF - Sangameswaran 03:52:35 08/05/02 (4)
- Re: Expansion of jcl from REXX using IOF - Jim Walker 09:59:50 08/05/02 (3)
  - Re: Expansion of jcl from REXX using IOF - Subra 15:39:59 08/08/02 (2)
    - Re: Expansion of jcl from REXX using IOF - Sangameswaran 04:36:54 08/10/02 (1)
      - Re: Expansion of jcl from REXX using IOF - Jim Walker 14:22:56 09/16/02 (0)
"bilingual or conditional" security (saf or not) - Dave Trigger 13:53:47 08/01/02 (1)
- Re: "bilingual or conditional" security (saf or not) - Jim Walker 16:51:06 08/01/02 (0)
Snap a job's output from its last step. - Don Rifkin - MCI Billing Operations 18:23:33 07/30/02 (1)
- Re: Snap a job's output from its last step. - Jim Walker 11:38:46 07/31/02 (0)
Printer active - Ron Ciavaglia 10:22:36 07/18/02 (2)
- Re: Printer active - Jim Walker 12:29:24 07/18/02 (1)
  - Re: Printer active - Jim Walker 15:45:55 07/22/02 (0)
Browse output in wide screen mode? - Charlie Felton 05:50:49 07/11/02 (2)
- Re: Browse output in wide screen mode? - Bill Pyszczek 11:34:10 08/15/02 (0)
- Re: Browse output in wide screen mode? - Steve Blankinship 09:11:53 07/12/02 (0)
Can't get TSIEXEC VPUT to work (RC 4) - Bob Bridges 18:53:05 06/28/02 (4)
- Re: Can't get TSIEXEC VPUT to work (RC 4) - Jim Walker 11:34:32 07/01/02 (1)
  - Can't get TSIEXEC VPUT to work - Bob Bridges 18:04:22 07/10/02 (0)
IBM 'Customer Initiated Upgrade' - Mark Taylor 13:19:06 06/26/02 (1)
- Re: IBM 'Customer Initiated Upgrade' - Steve Blankinship 09:39:05 06/27/02 (0)
CLIST and MCS Console Output Capture - Todd Lucas 14:31:58 06/24/02 (1)
- Re: CLIST and MCS Console Output Capture - Jim Walker 15:10:05 06/24/02 (0)
Limiting access to the MVS V WLM command - Alice Astle 11:12:22 06/24/02 (1)
- Re: Limiting access to the MVS V WLM command - Steve Blankinship 15:05:04 06/24/02 (0)
PF11 in IOF syslog, inconsistent Shift amount - Lynette Pope 16:12:15 06/19/02 (1)
- Re: PF11 in IOF syslog, inconsistent Shift amount - Steve Blankinship 10:32:56 06/20/02 (0)
IOFWTR doing deletes but doesnt delete canceled output - Mike Lawrence 09:39:11 06/12/02 (2)
- Re: IOFWTR doing deletes but doesnt delete canceled output - Jim Walker 10:58:13 06/12/02 (1)
  - Re: IOFWTR doing deletes but doesnt delete canceled output - Mike Lawrence 11:19:38 06/12/02 (0)
STOP A PRODUCTION JOB FROM A REXX - DALE HOFMAIER 14:48:04 06/10/02 (1)
- Re: STOP A PRODUCTION JOB FROM A REXX - Jim Walker 14:37:39 06/11/02 (0)
zOS 1.3 Support - Lee Barnes 09:29:29 06/10/02 (1)
- Re: zOS 1.3 Support - Steve Blankinship 10:56:14 06/10/02 (0)
IOF 7G and option-member A60ACF - Peter Huesken 08:23:13 06/05/02 (3)
- Re: IOF 7G and option-member A60ACF - Steve Blankinship 14:32:58 06/05/02 (2)
  - Re: IOF 7G and option-member A60ACF - Peter Huesken 04:32:39 06/06/02 (1)
    - Re: IOF 7G and option-member A60ACF - paul van nobelen 09:29:05 04/22/03 (0)
record counts wrong - Ron Ciavaglia 16:05:00 05/20/02 (1)
- Re: record counts wrong - Steve Blankinship 15:45:31 05/21/02 (0)
UPLOAD process has stopped working - Mike Lawrence 12:28:04 05/20/02 (2)
- Re: UPLOAD process has stopped working - Jim Walker 14:23:12 05/20/02 (0)
- Re: UPLOAD process has stopped working - Jim Walker 14:17:36 05/20/02 (0)
$HASP006 $TOJ0000053, TRANSLATED BY EXIT HASX05C TO $TOJ(0000053) - Mike Lawrence 12:27:09 05/15/02 (1)
- Re: $HASP006 $TOJ0000053, TRANSLATED BY EXIT HASX05C TO $TOJ(0000053) - Steve Blankinship 14:55:58 05/15/02 (0)
IOF 7G SR command - Mike Lawrence 16:49:21 04/29/02 (4)
- Re: IOF 7G SR command - Jim Walker 09:26:38 04/30/02 (0)
Batch IOF question. - Jasen Kloeppel 09:20:21 04/26/02 (1)
- Re: Batch IOF question. - Jim Walker 09:56:55 04/26/02 (0)
IOF 7f0 with z/OS version 1.3 - Doug Oliverio 11:20:39 04/23/02 (1)
- Re: IOF 7f0 with z/OS version 1.3 - Steve Blankinship 14:29:13 04/23/02 (0)
SNAPPING IOF OUTPUT WITH REXX IN BATCH - DALE HOFMAIER 09:15:32 04/09/02 (2)
- Re: SNAPPING IOF OUTPUT WITH REXX IN BATCH - Steve Blankinship 10:44:27 04/09/02 (1)
  - Re: SNAPPING IOF OUTPUT WITH REXX IN BATCH - DALE HOFMAIER 12:35:16 04/09/02 (0)
hexadecimal serial number - Doug Oliverio 10:50:14 04/04/02 (1)
- Re: hexadecimal serial number - Steve Blankinship 11:23:59 04/04/02 (0)
Expired Password - Renato Manglal-lan 16:15:57 04/03/02 (1)
- Re: Expired Password - Steve Blankinship 10:11:54 04/04/02 (0)
Console support - Lou DAgnolo 13:27:11 04/01/02 (1)
- Re: Console support - Frank V. Schubert 10:50:20 04/02/02 (0)
Release 7G DVAR EXPRDATE display - David Eakins 15:12:10 03/12/02 (1)
- Re: Release 7G DVAR EXPRDATE display - Steve Blankinship 16:18:12 03/12/02 (0)
IOF cancel job racf restrictions by id - Mike Stall 08:15:20 03/12/02 (1)
- Re: IOF cancel job racf restrictions by id - Jim Walker 09:49:45 03/12/02 (0)
Enclave CPU usage - Dave Trigger 13:00:25 03/07/02 (1)
- Re: Enclave CPU usage - Frank V. Schubert 14:44:48 03/07/02 (0)
IOF 7F - IBMSAF parameter clarification - Herb Volkert 15:03:13 03/06/02 (1)
- Re: IOF 7F - IBMSAF parameter clarification - Frank V. Schubert 15:28:37 03/07/02 (0)
can not start an INIT get refused message - Diamond Pipiles 14:25:40 03/01/02 (2)
- Re: can not start an INIT get refused message - Jim Walker 16:19:35 03/01/02 (1)
  - Re: can not start an INIT get refused message - diamond Pipiles 17:42:09 03/01/02 (0)
How can we restrict certain primary & line commands-iof7f. - Doug Oliverio 14:44:27 02/27/02 (2)
- Re: How can we restrict certain primary & line commands-iof7f. - Jim Walker 15:30:51 02/27/02 (0)
Removing HiLited messages - M Nolan 16:11:01 02/20/02 (1)
- Re: Removing HiLited messages - Jim Walker 16:55:21 02/20/02 (0)
Remove iof version in IOF for CICS - Dave Trigger 14:46:29 02/20/02 (3)
- Re: Remove iof version in IOF for CICS - Jim Prestwood 16:49:30 02/20/02 (1)
  - Re: Remove iof version in IOF for CICS - Dave Trigger 13:28:55 02/21/02 (0)
Download/Upload already printed sysout - Mike Lawrence 15:47:34 02/11/02 (2)
- Re: Download/Upload already printed sysout - Steve Blankinship 10:41:10 02/12/02 (0)
- Re: Download/Upload already printed sysout - Jim Walker 16:57:43 02/11/02 (0)
Read 'Sysout' and 'Messages' of an abended job from a Rexx Exec - Chitra.D 06:03:22 02/06/02 (3)
- Re: Read 'Sysout' and 'Messages' of an abended job from a Rexx Exec - Jim Walker 10:22:45 02/06/02 (2)
  - Re: Read 'Sysout' and 'Messages' of an abended job from a Rexx Exec - Chitra.D 23:44:00 02/10/02 (0)
MAS display JOEFREE BERTFREE - Walt Sapp 19:58:56 01/30/02 (2)
- Re: MAS display JOEFREE BERTFREE - Jim Walker 10:41:29 01/31/02 (1)
  - Re: MAS display JOEFREE BERTFREE - Walt Sapp 10:58:08 02/01/02 (0)
Upload of the Downloaded sysout - Mike Lawrence 11:38:13 01/28/02 (2)
- Re: Upload of the Downloaded sysout - Jim Walker 10:16:17 01/29/02 (1)
Subsystem down message - Mike Lawrence 14:22:29 01/23/02 (2)
- Re: Subsystem down message - Steve Blankinship 15:06:38 01/23/02 (1)
  - Re: Subsystem down message - Mike Lawrence 11:55:27 01/24/02 (0)
how do i copy a started task jes log to flatfile in batch - chris mcneill 10:02:25 01/11/02 (1)
- Re: how do i copy a started task jes log to flatfile in batch - Jim Walker 15:23:38 01/11/02 (0)
how to use IOFWTR! - charles laflamme 16:31:11 01/10/02 (1)
- Re: how to use IOFWTR! - Jim Walker 15:06:01 01/11/02 (0)
copy syslog in a dataset with a rexx - Charles Laflamme 15:00:56 01/08/02 (3)
- Re: copy syslog in a dataset with a rexx - Jim Walker 09:50:39 01/09/02 (2)
  - Re: copy syslog in a dataset with a rexx - Charles Laflamme 10:05:40 01/09/02 (0)
  - Re: copy syslog in a dataset with a rexx - Charles Laflamme 10:05:13 01/09/02 (0)
Install IOF with SMP/E - Guillaume Carrier 15:41:11 01/07/02 (1)
- Re: Install IOF with SMP/E - Jim Walker 16:08:26 01/07/02 (0)
How to obtain the current data line in a variable in IOF browse - Joel Choy 15:08:04 01/04/02 (3)
- Re: How to obtain the current data line in a variable in IOF browse - Jim Walker 17:17:04 01/04/02 (2)
  - Re: How to obtain the current data line in a variable in IOF browse - Joel Choy 17:39:34 01/04/02 (1)
    - Re: How to obtain the current data line in a variable in IOF browse - Jim Walker 11:25:39 01/07/02 (0)
INVNULL - Roger Monteith 06:04:01 01/03/02 (2)
- Re: INVNULL - Jim Walker 15:56:30 01/07/02 (0)
- Re: INVNULL - Jim Walker 11:32:38 01/07/02 (0)
Installing IBM Shark 2105-F20 ESS devices - Rob Richey 13:00:48 12/31/01 (1)
- Re: Installing IBM Shark 2105-F20 ESS devices - Steve Blankinship 10:21:18 01/02/02 (0)
exclude command - Lou dagnolo 14:38:41 12/13/01 (3)
- Re: exclude command - Jim Walker 15:02:44 12/13/01 (1)
UPLOAD security failed with 7F - Daniel Malenfant 19:28:01 11/27/01 (3)
- Re: UPLOAD security failed with 7F - Jim Walker 09:42:24 11/28/01 (2)
  - OFFLOAD/UPLOAD in HOLD - Daniel Malenfant 13:57:02 12/14/01 (1)
    - Re: OFFLOAD/UPLOAD in HOLD - Jim Walker 11:52:52 12/19/01 (0)
IOF 7G manuals - Susan Bebeau 14:48:14 11/27/01 (1)
- Re: IOF 7G manuals - Steve Blankinship 15:45:04 11/27/01 (0)
CNSCROLL - Larry Haugerud 14:49:19 11/12/01 (1)
- Re: CNSCROLL - Steve Blankinship 15:33:10 11/12/01 (0)
Display the room of an outgroup - Stewart Spyker 14:05:09 11/05/01 (2)
- Re: Display the room of an outgroup - Jim Walker 11:20:20 11/06/01 (0)
- Re: Display the room of an outgroup - Stewart Spyker 07:57:31 11/06/01 (0)
Enclave CPU usage - Steve Wong 11:57:45 10/23/01 (1)
- Re: Enclave CPU usage - Frank V. Schubert 12:31:16 10/23/01 (0)
Jobs with Unknown Status - Keith Crawford 11:07:21 10/15/01 (1)
- Re: Jobs with Unknown Status - Steve Blankinship 10:43:45 10/18/01 (0)
IOF displays on entry. - Mark Taylor 15:09:55 10/03/01 (1)
- Re: IOF displays on entry. - Jim Walker 15:37:24 10/04/01 (0)
TSIEXEC - Bob Chapman 11:02:10 10/03/01 (2)
- Re: TSIEXEC - Bob Chapman 11:10:33 10/03/01 (1)
  - Re: TSIEXEC - Jim Walker 11:50:19 10/03/01 (0)
Issuing selected commands - Alice Astle 09:52:18 09/21/01 (2)
- Re: Issuing selected commands - Steve Blankinship 15:39:00 09/21/01 (0)
- Re: Issuing selected commands - Steve Blankinship 15:27:40 09/21/01 (0)
Call dynamically IOF! - Charles Laflamme 14:49:56 09/10/01 (1)
- Re: Call dynamically IOF! - Jim Walker 15:40:36 09/10/01 (0)
'CLIST NOT FND' message trying to view syslog on remote system - Barb Couture 15:44:56 09/06/01 (1)
- Re: 'CLIST NOT FND' message trying to view syslog on remote system - Steve Blankinship 16:35:18 09/06/01 (0)
ISSUE operator commands from IOF - Lee Barnes 15:05:37 09/04/01 (1)
- Re: ISSUE operator commands from IOF - Jim Walker 16:50:37 09/04/01 (0)
What determines if IOF displays output in Lines or Pages - Tom Klinge 14:24:14 08/27/01 (1)
- Re: What determines if IOF displays output in Lines or Pages - Jim Walker 10:24:27 08/28/01 (0)
TSIEXEC return code 4 - John Bodoh 11:00:09 08/16/01 (2)
- Re: TSIEXEC return code 4 - Rosemary Bodoh Gullett 13:51:55 09/06/02 (0)
- Re: TSIEXEC return code 4 - Jim Walker 11:47:23 08/16/01 (0)
EVERY Command and session lockup. - Scott MacDonald 13:07:16 08/15/01 (1)
- Re: EVERY Command and session lockup. - Steve Blankinship 17:32:59 08/15/01 (0)
Issuing MVS commands from the log display - Bill Reynolds 12:22:33 08/01/01 (2)
- Re: Issuing MVS commands from the log display - Frank V. Schubert 17:37:04 08/02/01 (0)
defining conditions in slaminst - Bill Reynolds 17:33:53 07/19/01 (1)
- Re: defining conditions in slaminst - Jim Walker 09:41:26 07/20/01 (0)
NULLSYSO setting for IOF 7F - Jim Yashinski 08:52:35 07/10/01 (1)
- Re: NULLSYSO setting for IOF 7F - Jim Walker 09:57:01 07/10/01 (0)
Machine Type Change - Rhett L. Goby 16:15:39 07/09/01 (1)
- Re: Machine Type Change - Steve Blankinship 09:46:02 07/10/01 (0)
iof moniotr cpu busy percent vs total of task cpu% - mike cunningham 10:41:12 07/03/01 (1)
- Re: iof moniotr cpu busy percent vs total of task cpu% - Frank V. Schubert 15:13:07 07/03/01 (0)
Snapping JES files using Group Number - Michael Murray 14:50:52 07/02/01 (1)
- Re: Snapping JES files using Group Number - Jim Walker 15:59:40 07/02/01 (0)
Z/900 Processor - Bob Chapman 15:47:46 06/14/01 (1)
- Re: Z/900 Processor - Jim Walker 16:12:44 06/14/01 (0)
Failure to syslog, and not own jobs using external security - Dave Trigger 15:04:48 06/13/01 (2)
- Re: Failure to syslog, and not own jobs using external security - Jim Walker 15:32:22 06/14/01 (0)
- Re: Failure to syslog, and not own jobs using external security - Jim Walker 09:51:43 06/14/01 (0)
Output Group Display error in ACTion field - Andrew Pong 11:41:18 06/13/01 (5)
- Re: Output Group Display error in ACTion field - Jim Walker 09:41:14 06/20/01 (1)
Total External security - Dave Trigger 13:31:54 06/06/01 (2)
- Re: Total External security - Jim Walker 14:40:27 06/06/01 (1)
  - Re: Total External security - Knut Haug 05:34:07 10/03/01 (0)
Invalid Forms - Craig Potterton 15:57:27 05/31/01 (1)
- Re: Invalid Forms - Jim Walker 17:34:10 06/04/01 (0)
EXCLUDE - Steve McCarthy 11:28:24 05/25/01 (2)
- Re: EXCLUDE - Jim Walker 11:33:59 05/30/01 (0)
- Re: EXCLUDE - Jim Walker 09:46:54 05/29/01 (0)
Scrolling EMCS console - Rob Kurnell 14:35:57 05/23/01 (2)
- Re: Scrolling EMCS console - Jim Walker 15:14:27 05/23/01 (1)
  - Re: Scrolling EMCS console - Jim Walker 15:04:03 11/05/02 (0)
In-Stream Data - Mike Burton 14:38:57 05/18/01 (2)
- Re: In-Stream Data - Jim Walker 14:07:47 05/21/01 (1)
  - Re: In-Stream Data - Subra 16:42:41 08/14/02 (0)
Use of OUTQUE CLIST IOF 7.E OS/390 2.9 - Deanie Lee 13:15:59 05/18/01 (1)
- Re: Use of OUTQUE CLIST IOF 7.E OS/390 2.9 - Steve Blankinship 16:46:41 05/21/01 (0)
Job access for RACF group in IOF. - Jasen Kloeppel 15:52:55 05/03/01 (1)
- Re: Job access for RACF group in IOF. - Jim Walker 11:54:09 05/04/01 (0)
Held MEMOCLAS - Robbie Gregory 10:05:53 05/03/01 (2)
- Re: Held MEMOCLAS - Jim Walker 11:07:57 05/03/01 (1)
  - Re: Held MEMOCLAS - Robbie Gregory 11:14:36 05/03/01 (0)
Selecting a job with many spun sysouts - Jim Walker 14:14:55 05/02/01 (2)
- Re: Selecting a job with many spun sysouts - Jim Walker 15:59:53 05/04/01 (0)
Output on system hold - Robbie Gregory 14:06:02 05/02/01 (1)
- Re: Output on system hold - Jim Walker 14:37:32 05/02/01 (0)
ACF2 Resource Class - Valerie Garner 16:57:19 04/19/01 (1)
- Re: ACF2 Resource Class - Frank V. Schubert 16:32:07 04/20/01 (0)
Listing Jobs in order - Premkumar 01:36:35 04/13/01 (1)
- Re: Listing Jobs in order - Jim Walker 08:59:23 04/16/01 (0)
Executing a Proc within a Proc - Kevin 11:08:57 04/11/01 (1)
- Re: Executing a Proc within a Proc - Frank V. Schubert 12:30:00 04/11/01 (0)
IKJEFT01 vs. IKJEFT1B - Pam Smith 14:55:25 04/10/01 (3)
- Re: IKJEFT01 vs. IKJEFT1B - Jim Walker 09:11:44 04/16/01 (1)
Day--Time Field Innacurate - Henry Gonzales 16:01:14 04/05/01 (1)
- Re: Day--Time Field Innacurate - Jim Walker 09:06:43 04/16/01 (0)
Access rules - ACF and B23ALLOW - James Pendrigh 15:17:28 04/03/01 (2)
- Re: Access rules - ACF and B23ALLOW - Frank V. Schubert 19:17:22 04/04/01 (0)
- Re: Access rules - ACF and B23ALLOW - James Pendrigh 17:40:56 04/04/01 (0)
Re: JCL error. Help. - Dan Capadona 13:23:20 03/27/01 (1)
- Re: JCL error. Help. - Frank V. Schubert 19:57:38 03/27/01 (0)
to monitor iof jobs and wants to initiate another job using rexx - Hari 03:02:15 03/24/01 (1)
- Re: to monitor iof jobs and wants to initiate another job using rexx - Jim Walker 10:52:27 03/26/01 (0)
Purging Output over x Hours old - Russ Lewis 22:53:03 03/11/01 (1)
- Re: Purging Output over x Hours old - Jim Walker 12:16:02 03/12/01 (0)
Status Field value CONVERT - Janice Engle Woodcox 20:40:52 03/07/01 (1)
- Re: Status Field value CONVERT - Jim Walker 16:17:34 03/08/01 (0)
New installation procedures - Patrick James Carroll 15:24:58 03/07/01 (1)
- Re: New installation procedures - Jim Walker 15:03:40 03/08/01 (0)
B23ALLOW macro question. - Jasen Kloeppel 10:25:22 03/07/01 (1)
- Re: B23ALLOW macro question. - Jim Walker 11:36:49 03/07/01 (0)
LE support - Daniel Malenfant 14:32:48 03/06/01 (1)
- Re: LE support - Steve Blankinship 09:58:43 03/07/01 (0)
browse command not behaving properly in iof? - Nomikos Zografakis 16:34:47 02/26/01 (2)
- Re: browse command not behaving properly in iof? - Frank Schubert 12:34:02 02/27/01 (1)
IOF RFIND in Browse Mode sometimes does not find every occurrence of the Find in a Running Job - Richard A. Landkamer 12:04:55 02/16/01 (2)
- Re: IOF RFIND in Browse Mode sometimes does not find every occurrence of the Find in a Running Job - Jim Walker 10:59:59 02/21/01 (0)
- Re: IOF RFIND in Browse Mode sometimes does not find every occurrence of the Find in a Running Job - Jim Walker 17:21:20 02/16/01 (0)
Re: JCL error IEF210. - Dan Capadona 19:27:20 02/09/01 (1)
- Re: JCL error IEF210. - Jim Walker 10:15:35 02/12/01 (0)
SYSOUTS in B23allow - Marloes Hermsen 08:24:38 02/06/01 (1)
- Re: SYSOUTS in B23allow - Jim Walker 10:01:15 02/06/01 (0)
SLAMMEMO dsn format - Robbie Gregory 15:41:14 01/11/01 (1)
- Re: SLAMMEMO dsn format - Jim Walker 11:44:39 01/12/01 (0)
IOF Extended MCS Console - Dan Fry 13:53:13 01/04/01 (1)
- Re: IOF Extended MCS Console - Frank V. Schubert 09:04:27 01/05/01 (0)
Display Jobclasses under IOF with WLM initiators - Stan Nutt 15:14:34 12/12/00 (1)
- Re: Display Jobclasses under IOF with WLM initiators - Jim Walker 16:29:15 12/12/00 (0)
SLAMRUN abend 0C1 - Keith Norman 03:42:02 12/07/00 (1)
- Re: SLAMRUN abend 0C1 - Jim Walker 13:15:03 12/08/00 (0)
edit of a browsed vba sysout removes blank lines - Girard McDermott 09:20:52 12/06/00 (4)
- Re: edit of a browsed vba sysout removes blank lines - Jim Walker 11:26:35 12/07/00 (0)
- Re: edit of a browsed vba sysout removes blank lines - Girard McDermott 12:25:37 12/06/00 (0)
- Re: edit of a browsed vba sysout removes blank lines - Jim Walker 11:58:24 12/06/00 (1)
  - Re: edit of a browsed vba sysout removes blank lines - Girard McDermott 12:52:41 12/06/00 (0)
Console command response in SYSLOG - Mark Snelder 09:44:35 12/05/00 (2)
- Re: Console command response in SYSLOG - Frank V. Schubert 09:39:53 12/19/00 (0)
Jes2 Node - Guillaume Carrier 12:42:14 11/24/00 (1)
- Re: Jes2 Node - Jim Walker 09:06:05 11/27/00 (0)
SYSPLEX console id changes - John D. King 11:21:29 11/22/00 (1)
- Re: SYSPLEX console id changes - Jim Walker 12:56:42 11/28/00 (0)
Return code from REXX exec in batch - Jim Donaldson 13:49:07 11/02/00 (3)
- Re: Return code from REXX exec in batch - Jim Walker 15:40:59 11/02/00 (2)
  - Re: Return code from REXX exec in batch - John Hansel 15:52:23 10/25/06 (0)
  - Re: Return code from REXX exec in batch - Jim Walker 15:50:12 11/02/00 (0)
ROOM option on SS command - Daniel Malenfant 15:19:47 11/01/00 (1)
- Re: ROOM option on SS command - Jim Walker 16:06:53 11/01/00 (0)
Finding/scrolling within extended MCS console - Jim Donaldson 16:51:14 10/26/00 (1)
- Re: Finding/scrolling within extended MCS console - Frank V. Schubert 12:16:54 10/27/00 (4)
I.O partial list - Deanie Lee 10:01:02 10/10/00 (3)
- Re: I.O partial list - Deanie Lee 09:27:30 08/08/03 (0)
- Re: I.O partial list - Frank V. Schubert 15:17:43 10/10/00 (1)
  - Re: I.O partial list - Joyce Tesarski 11:59:01 05/07/02 (0)
IOF access under RACF control - Brian Stahl 09:07:50 09/29/00 (1)
- Re: IOF access under RACF control - Jim Walker 10:09:10 10/06/00 (0)
JAROFFLD - Diamond Pipiles 16:19:52 09/22/00 (1)
- Re: JAROFFLD - Jim Walker 13:42:33 09/25/00 (0)
SLAM Insufficient memory to perform requested function - Joe D'Alessandro 10:44:29 09/18/00 (2)
- Re: SLAM Insufficient memory to perform requested function - Jim Walker 13:30:58 09/18/00 (1)
  - Re: SLAM Insufficient memory to perform requested function - Jim Walker 09:16:05 09/20/00 (0)
IOF access from a batch program - peter koppany 12:20:30 09/08/00 (4)
- Re: IOF access from a batch program - Jim Walker 10:12:11 09/11/00 (3)
  - More information - Jim Walker 10:52:38 09/12/00 (2)
    - Re: More information - Jim Walker 12:22:44 09/13/00 (1)
      - Using IOF unconventionally or How to avoid learning JES2 programming - Mike Schmutzok 15:14:12 02/04/08 (0)
Secondary JES2 - Lionel B. Dyck 10:31:22 08/28/00 (1)
- Re: Secondary JES2 - Jim Walker 12:22:17 08/28/00 (0)
Issue command in batch with clist to IOF - Don Pasquarella 09:45:32 08/28/00 (2)
- Re: Issue command in batch with clist to IOF - Jose L. Cano 15:23:05 12/06/00 (0)
- Re: Issue command in batch with clist to IOF - Jim Walker 12:15:15 08/28/00 (0)
UPLOAD keeps pulling from an old DSN - Tom Klinge 14:39:26 08/22/00 (1)
- Re: UPLOAD keeps pulling from an old DSN - Jim Walker 15:43:41 08/22/00 (0)
Swap out Reason Codes - Phil Andeson 07:21:11 08/09/00 (2)
- Re: Swap out Reason Codes - Jim Walker 09:56:46 08/09/00 (1)
  - Correction to previous response - Jim Walker 11:41:27 08/09/00 (0)
iof to acf2 - Ron Ciavaglia 11:01:11 08/07/00 (1)
- Re: iof to acf2 - Jim Walker 14:18:17 08/07/00 (0)
Who command doesn't work - Tom Klinge 12:57:37 07/31/00 (2)
- Re: Who command doesn't work - Jim Walker 10:05:25 08/01/00 (0)
- Re: Who command doesn't work - Jim Walker 14:52:27 07/31/00 (0)
sysout print counts truncated - steve mcclain 11:35:36 07/27/00 (3)
- Re: sysout print counts truncated - steve mcclain 11:43:13 07/27/00 (2)
  - Re: sysout print counts truncated - Steve Blankinship 15:33:08 07/27/00 (0)
  - Re: sysout print counts truncated - Steve Blankinship 15:04:36 07/27/00 (0)
AFter OS390 2.8 maint.. SUBSYSTEM DOWN?? - Bill Long 18:24:19 07/09/00 (1)
- Re: AFter OS390 2.8 maint.. SUBSYSTEM DOWN?? - Jim Walker 15:16:55 07/10/00 (0)
CLasses - Dianne G. Hargraves 14:03:56 06/07/00 (1)
- Re: CLasses - Jim Walker 16:25:47 06/07/00 (0)
REXX to IOF get partial list - memory constraints - Mitch Hutt 09:59:09 05/18/00 (1)
- Re: REXX to IOF get partial list - memory constraints - Jim Walker 14:00:58 05/18/00 (0)
IOF support for Work Load Manager(goal mode) - Sam Rogers 16:49:09 05/11/00 (1)
- Re: IOF support for Work Load Manager(goal mode) - Jim Walker 12:43:28 05/12/00 (0)
Rerouting job output - Jos Wenmacker 06:57:32 05/08/00 (1)
- Re: Rerouting job output - Jim Walker 11:13:46 05/08/00 (0)
Error SYSID/IND with Set command - Bob Stoffregen 11:23:23 05/03/00 (1)
- Re: Error SYSID/IND with Set command - Jim Walker 16:52:10 05/03/00 (0)
ZAPs - Daniel Fry 09:12:45 04/25/00 (1)
- Re: Expiration ZAPs - Jim Walker 09:18:06 04/25/00 (0)
B49CMPAT has changed with IOF 7E? - Bob Grozier 11:25:15 04/19/00 (1)
- Re: B49CMPAT has changed with IOF 7E? - Jim Walker 11:19:59 04/20/00 (0)
Euro Ready - Hans Coolen 05:25:59 04/14/00 (1)
- Re: Euro Ready - Jim Walker 10:06:06 04/17/00 (0)
allocation of OFFDIR-ds on specific volume (IOF7D) - M.Hermsen 04:02:09 04/11/00 (2)
- Re: allocation of OFFDIR-ds on specific volume (IOF7D) - Jim Walker 10:17:57 04/12/00 (0)
- Re: allocation of OFFDIR-ds on specific volume (IOF7D) - M.Hermsen 10:12:56 04/11/00 (0)
IOF for USS - Craig E. Major 16:50:55 04/06/00 (1)
- Re: IOF for USS - Frank V. Schubert 14:05:38 04/07/00 (0)
ACF2 - Guillaume Carrier 09:37:13 04/06/00 (1)
- Re: ACF2 - Frank V. Schubert 11:30:05 04/07/00 (0)
Restart E command - Mel Gingrich 10:30:17 04/05/00 (2)
- Re: Restart E command - Jim Walker 14:30:21 04/12/00 (0)
- Re: Restart E command - Frank V. Schubert 11:22:04 04/07/00 (0)
Using TSIEXEC in a REXX EXEC under IOF - Tom Bailey 02:10:15 03/28/00 (2)
- Re: Using TSIEXEC in a REXX EXEC under IOF - Jim Walker 12:19:04 03/28/00 (0)
- Re: Using TSIEXEC in a REXX EXEC under IOF - Jim Walker 09:35:06 03/28/00 (0)
Mismatch for held record count. - Bob Grozier 09:10:15 3/03/00 (1)
- Re: Mismatch for held record count. - Jim Walker 10:32:08 3/03/00 (0)
SLAMRUN processing when SYSLOG spun off - Keith Norman 07:56:46 2/29/00 (1)
- Re: SLAMRUN processing when SYSLOG spun off - Jim Walker 11:25:55 3/02/00 (0)
msg 1382 ENQ request failed because resource is not available - Robert Grozier 09:44:18 2/24/00 (1)
- Re: msg 1382 ENQ request failed because resource is not available - Jim Walker 11:55:44 2/24/00 (0)
EDit command not building sysin data - Arne Hansen 16:02:38 2/16/00 (1)
- Re: EDit command not building sysin data - Jim Walker 15:58:56 2/17/00 (0)
User written line commands - is it possible? - Bob Grozier 12:49:25 2/04/00 (1)
- Re: User written line commands - is it possible? - Jim Walker 12:23:42 2/08/00 (0)
PFKEYS - Guillaume Carrier 10:59:21 1/31/00 (1)
- Re: PFKEYS - Jim Walker 16:53:55 1/31/00 (0)
Rexx exec interface to IOF - Sheldon Rodgers 12:19:14 1/28/00 (5)
- Re: Rexx exec interface to IOF - Jim Walker 16:42:16 1/31/00 (4)
  - Re: Rexx exec interface to IOF - Sheldon Rodgers 09:31:55 2/01/00 (3)
    - Re: Rexx exec interface to IOF - Jim Walker 11:26:45 2/01/00 (2)
      - Re: Rexx exec interface to IOF - Sheldon Rodgers 15:10:28 2/01/00 (1)
        
        Re: Rexx exec interface to IOF - Jim Walker 12:12:13 2/02/00 (0)
INSTALL ERROR - incorrect JESCTL assembly - SA - Tom Klinge 12:52:07 1/26/00 (2)
- Re: INSTALL ERROR - incorrect JESCTL assembly - SA - Jim Walker 11:13:30 1/27/00 (0)
- Re: INSTALL ERROR - incorrect JESCTL assembly - SA - Tom Klinge 13:57:10 1/26/00 (0)
ST command in IOF - Tom Klinge 16:51:59 1/14/00 (1)
- Re: ST command in IOF - Jim Walker 15:00:39 1/18/00 (0)
Execution Class - Martin Boland 06:28:54 12/21/99 (1)
- Re: Execution Class - Jim Walker 15:07:10 12/21/99 (0)
Restricting Output Summary - Steve McCarthy 06:43:57 12/03/99 (1)
- Re: Restricting Output Summary - Jim Walker 13:51:00 12/03/99 (0)
IOF#F profile - Tom Klinge 12:08:31 11/29/99 (1)
- Re: IOF#F profile - Jim Walker 14:12:11 12/01/99 (0)
Allow/Limit for Payroll Jobs - Doug Rogers 14:19:15 11/18/99 (2)
- Re: Allow/Limit for Payroll Jobs - Jim Walker 10:50:47 11/22/99 (1)
  - Re: Allow/Limit for Payroll Jobs - Doug Rogers 15:25:01 11/22/99 (0)
$TSI$ Profile Dataset - Frank Houser 14:55:12 10/18/99 (1)
- Re: $TSI$ Profile Dataset - Jim Walker 09:44:21 10/19/99 (0)
Re: purging non helf output. - Jim Walker 11:25:45 10/06/99 (2)
- Re: purging non helf output. - Lou D'Agnolo 09:34:38 10/07/99 (1)
  - Re: purging non helf output. - Jim Walker 08:33:57 10/08/99 (0)
Setup of SYSPLEX SERVER - Lee Barnes 11:03:11 9/28/99 (1)
- Re: Setup of SYSPLEX SERVER - Jim Walker 09:35:22 9/30/99 (0)
CICS Transaction Server version 1.3 support - Scott Clifford 09:54:00 7/29/99 (2)
- Re: CICS Transaction Server version 1.3 support - Jim Prestwood 14:40:49 7/30/99 (1)
  - Re: CICS Transaction Server version 1.3 support - Vaughan Phillips 07:06:53 07/14/00 (0)
Error 2575 - Perry Newman 12:12:24 7/21/99 (2)
- Re: Error 2575 - Jim Walker 16:44:53 7/21/99 (1)
  - Re: Error 2575 - Jim Walker 10:12:11 04/13/05 (0)
IOF Batch Find Return Code - Carol Finch 19:02:23 6/22/99 (1)
- Re: IOF Batch Find Return Code - Jim Walker 09:04:18 6/23/99 (0)
Multiple uses of ALLOW macros - Bruce Koelker 14:23:41 2/18/99 (1)
- Re: Multiple uses of ALLOW macros - Jim Walker 16:36:07 2/18/99 (0)

Post A Message!

Scripts and WWWBoard created by Matt Wright and can be found at Matt's Script Archive

142537